On 09/13/2018 01:52 AM, Koyel Das (Vehere) wrote:
I am attaching the flowgraph and property dialog box where you can see
the gain, antennas etc. I am using vert 2450 antennas.
Regards,
Koyel
Attaching the actual .grc file would be more helpful.
Also, in the image you sent, both channels are using RX2, although you'd
say "RX1" which I took to mean "TX/RX", but not clear what you
meant.
Do you get any errors when you run this flow-graph?
What version of UHD are you using?
------------------------------------------------------------------------
*From:* USRP-users <usrp-users-boun...@lists.ettus.com> on behalf of
Marcus D. Leech via USRP-users <usrp-users@lists.ettus.com>
*Sent:* Thursday, September 13, 2018 11:14:59 AM
*To:* usrp-users@lists.ettus.com
*Subject:* Re: [USRP-users] Unable to receive two channels
On 09/13/2018 01:28 AM, Koyel Das (Vehere) via USRP-users wrote:
Hi,
I am using usrp 2955 R and trying to receive signals from RX1 port of
RF0 and RX2 port of RF1 simultaneously by configuring UHD usrp source
to receive two channels. I have made number of channels to two. And
set the antennas of the two as RX1 and RX2. But then no signal is
being received. When we have one channel then it receives signal.
We are using gnu radio in windows.
Regards,
Koyel
Could you perhaps share your flow-graph, and include more of your
details like frequencies, gains, what types of antennas, etc, etc.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
