On 08/31/2018 10:17 PM, Qiuyue Xue wrote:
Hi Marcus,
Thanks for the reply! Yes I have tried switching both
uhd and gnuradio versions(on another mac machine, not the previous
working one), the switched back uhd version is 003.010.001, and the
switched back gnuradio version is 3.7.10.1, macports version 2.5.3.
Shouldn't the usrp work with the newest version as well? Is this a
version problem or a hardware problem? Or could you please tell me
which version of uhd and gnuradio will work for USRP N210 and RFX900?
Thank you very much for your help!
Shirley
Well, it should all "just work", but you had reported that the earlier
version worked just fine.
The fact that your RX and TX eeprom are returning the same value
(0x0025) means that something is wrong, and perhaps you bent a pin
when you were re-seating it.
On Fri, Aug 31, 2018 at 10:02 PM Marcus D. Leech via USRP-users
<usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote:
On 08/31/2018 09:40 PM, Qiuyue Xue via USRP-users wrote:
Hi all,
I have been using the usrp N210 and RFX900 daughterboard, and it
was working well two days ago, but after I updated my
macports(and all the ports including uhd and gnuradio), the
device can't work anymore.
For now I can detect the usrp (when run uhd_detect_devices
command), but when I run uhd_usrp_probe or some other
commands(like gqrx or gnuradio application), I get this kind of
error/warning message:
At first it gave error:
[INFO] [UHD] Mac OS; Clang version 9.0.0 (clang-900.0.39.2);
Boost_106600; UHD_3.13.0.1-MacPorts-Release
[INFO] [USRP2] Opening a USRP2/N-Series device...
[INFO] [USRP2] Current recv frame size: 1472 bytes
[INFO] [USRP2] Current send frame size: 1472 bytes
[INFO] [USRP2] Detecting internal GPSDO....
[INFO] [GPS] No GPSDO found
[ERROR] [DBMGR] The daughterboard manager encountered a
recoverable error in init.
Loading the "unknown" daughterboard implementations to continue.
The daughterboard cannot operate until this error is resolved.
LookupError: KeyError: key "0" not found in dict(i,
N14adf4360_regs_t17prescaler_value_tE)
_____________________________________________________
/
| Device: USRP2 / N-Series Device
| _____________________________________________________
|/
| | Mboard: N210r4
| | hardware: 2577
| | mac-addr: 00:80:2f:19:89:31
| | ip-addr: 192.168.10.2
| | subnet: 255.255.255.255
| | gateway: 255.255.255.255
| | gpsdo: none
| | serial: 30757BE
| | FW Version: 12.4
| | FPGA Version: 11.1
| |
| | Time sources:none, external, _external_, mimo
| | Clock sources: internal, external, mimo
| | Sensors: mimo_locked, ref_locked
| | _____________________________________________________
| |/
| | | RX DSP: 0
| | |
| | | Freq range: -50.000 to 50.000 MHz
| | _____________________________________________________
| |/
| | | RX DSP: 1
| | |
| | | Freq range: -50.000 to 50.000 MHz
| | _____________________________________________________
| |/
| | | RX Dboard: A
| | | ID: RFX900 (0x0025)
| | | Serial: E1R14UBR9
| | | _____________________________________________________
| | |/
| | | | RX Frontend: 0
| | | | Name: Unknown (0xffff) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | |/
| | | | RX Codec: A
| | | | Name: ads62p44
| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
| | | | Gain range fine: 0.0 to 0.5 step 0.1 dB
| | _____________________________________________________
| |/
| | | TX DSP: 0
| | |
| | | Freq range: -200.000 to 200.000 MHz
| | _____________________________________________________
| |/
| | | TX Dboard: A
| | | ID: RFX900 (0x0029)
| | | Serial: E1R14UBR9
| | | _____________________________________________________
| | |/
| | | | TX Frontend: 0
| | | | Name: Unknown (0xffff) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | |/
| | | | TX Codec: A
| | | | Name: ad9777
| | | | Gain Elements: None
After I tried to reseat the daughterboard and add 8 screws to the
daughterboard, the error becomes warning:
[INFO] [UHD] Mac OS; Clang version 9.0.0 (clang-900.0.39.2);
Boost_106600; UHD_3.13.0.1-MacPorts-Release
[INFO] [USRP2] Opening a USRP2/N-Series device...
[INFO] [USRP2] Current recv frame size: 1472 bytes
[INFO] [USRP2] Current send frame size: 1472 bytes
[WARNING] [DBMGR] Unknown transceiver board ID combination.
Is your daughter-board mounted properly?
RX dboard ID: RFX900 (0x0025)
TX dboard ID: RFX900 (0x0025)
_____________________________________________________
/
| Device: USRP2 / N-Series Device
| _____________________________________________________
|/
| | Mboard: N210r4
| | hardware: 2577
| | mac-addr: 00:80:2f:19:89:31
| | ip-addr: 192.168.10.2
| | subnet: 255.255.255.255
| | gateway: 255.255.255.255
| | gpsdo: none
| | serial: 30757BE
| | FW Version: 12.4
| | FPGA Version: 11.1
| |
| | Time sources:none, external, _external_, mimo
| | Clock sources: internal, external, mimo
| | Sensors: mimo_locked, ref_locked
| | _____________________________________________________
| |/
| | | RX DSP: 0
| | |
| | | Freq range: -50.000 to 50.000 MHz
| | _____________________________________________________
| |/
| | | RX DSP: 1
| | |
| | | Freq range: -50.000 to 50.000 MHz
| | _____________________________________________________
| |/
| | | RX Dboard: A
| | | ID: RFX900 (0x0025)
| | | Serial: E1R14UBR9
| | | _____________________________________________________
| | |/
| | | | RX Frontend: 0
| | | | Name: RFX900 (0x0025) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | |/
| | | | RX Codec: A
| | | | Name: ads62p44
| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
| | | | Gain range fine: 0.0 to 0.5 step 0.1 dB
| | _____________________________________________________
| |/
| | | TX DSP: 0
| | |
--
_______________________________________________
Qiuyue Xue
M.S of Computer Science
Ubicomp lab, Georgia Institute of Technology
www.xueqiuyue.com <http://www.xueqiuyue.com>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
