On 08/09/2018 08:50 AM, Philip Balister via USRP-users wrote: > On 08/08/2018 11:49 PM, Walter Maguire via USRP-users wrote: >> Hi all, >> >> The readme file at https://github.com/EttusResearch/meta-ettus seems to >> be out of date with the current sumo release of poky. meta-ettus seems >> to require sumo branch (not the master) due to requiring u-boot >> 2018.1(master refers to 2018.7) but if sumo is the release then >> BBLAYERS are incorrect as specified by the repo readme. >> >> For example, the BBLAYERS refer to meta-oe/meta-oe but the current sumo >> release of poky meta-oe layer is located in meta-openembedded/meta-oe. >> >> A similar issue occurs with the gnuradio wiki covering meta-sdr, ie >> https://wiki.gnuradio.org/index.php/Meta-SDR. This website is out of >> date(for several years) and does not build using the instructions >> given. The only way I was able to get a set of compatible layers to >> build was by using the repo scripts posted on this website, >> https://github.com/balister/oe-gnuradio-manifest. This builds targets >> open-embedded , not poky and it limited to the krogoth branch of >> meta-ettus. I think krogoth is behind the latest by several releases. > > Sorry about the gnuradio web page, that is my fault. > > You don't mention what hardware you are using. Over the past few months > I've been doing work using git submodules instead of Google's repo tool. > This isn't a great solution, but is better than anything else I've tried > for being able to work with checkouts and push updates to layers. > > For the E310 try: > > https://github.com/balister/sdr-build/tree/rocko-e300
...and if you're on the N310, then we've recently updated the meta-ettus repo (see the master and sumo branches) for a more unified workflow. -- M _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
