On 08/08/2018 11:49 PM, Walter Maguire via USRP-users wrote:
> Hi all,
> 
> The readme file at https://github.com/EttusResearch/meta-ettus seems to
> be out of date with the current sumo release of poky. meta-ettus seems
> to require sumo branch (not the master) due to requiring u-boot
> 2018.1(master refers to 2018.7)  but if sumo is the release then
> BBLAYERS are incorrect as specified by the repo readme.
> 
> For example, the BBLAYERS refer to meta-oe/meta-oe but the current sumo
> release of poky meta-oe layer is located in meta-openembedded/meta-oe.
> 
> A similar issue occurs with the gnuradio wiki covering meta-sdr, ie
> https://wiki.gnuradio.org/index.php/Meta-SDR.  This website is out of
> date(for several years) and does not build using the instructions
> given.  The only way I was able to get a set of compatible layers to
> build was by using the repo scripts posted on this website,
> https://github.com/balister/oe-gnuradio-manifest. This builds targets
> open-embedded , not poky and it limited to the krogoth branch of
> meta-ettus.  I think krogoth is behind the latest by several releases.

Sorry about the gnuradio web page, that is my fault.

You don't mention what hardware you are using. Over the past few months
I've been doing work using git submodules instead of Google's repo tool.
This isn't a great solution, but is better than anything else I've tried
for being able to work with checkouts and push updates to layers.

For the E310 try:

https://github.com/balister/sdr-build/tree/rocko-e300

This is based of rocko, which is still getting updates. I've boot tested
only. I'd love feedback :) I do need to switch the pointer to meta-sdr
to the rocko branch to get gnuradio-3.7, currently set to pick up
gnuradio next where I am trying to make sure it builds and hopefully
works (when I have time)

This is strictly a spare time project for me these days. Contracts welcome.

Philip


> 
> The potential for confusion is very high given it is not clear if it is
> built using openembedded directly like meta-sdr above or by using the
> poky version (website suggest poky, but I no poky layers appear in
> BBLAYERS), no information  on the compatible releases for the associated
> dependent layers.  An example build similar to the one provided by
> https://github.com/balister/oe-gnuradio-manifest would be very
> helpful.   Similarly a manifest to wrap it up would be helpful.
> 
> 
> I would be grateful if someone would advise me of which release of poky
> or open-embedded  the meta-ettus and other dependent layers are required
> to get bitbake to successfully build the image.
> 
> Regards
> 
> 
> Walter
> 
> 
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to