Hi all,
The readme file at https://github.com/EttusResearch/meta-ettus seems to
be out of date with the current sumo release of poky. meta-ettus seems
to require sumo branch (not the master) due to requiring u-boot
2018.1(master refers to 2018.7) but if sumo is the release then
BBLAYERS are incorrect as specified by the repo readme.
For example, the BBLAYERS refer to meta-oe/meta-oe but the current sumo
release of poky meta-oe layer is located in meta-openembedded/meta-oe.
A similar issue occurs with the gnuradio wiki covering meta-sdr, ie
https://wiki.gnuradio.org/index.php/Meta-SDR. This website is out of
date(for several years) and does not build using the instructions
given. The only way I was able to get a set of compatible layers to
build was by using the repo scripts posted on this website,
https://github.com/balister/oe-gnuradio-manifest. This builds targets
open-embedded , not poky and it limited to the krogoth branch of
meta-ettus. I think krogoth is behind the latest by several releases.
The potential for confusion is very high given it is not clear if it is
built using openembedded directly like meta-sdr above or by using the
poky version (website suggest poky, but I no poky layers appear in
BBLAYERS), no information on the compatible releases for the associated
dependent layers. An example build similar to the one provided by
https://github.com/balister/oe-gnuradio-manifest would be very
helpful. Similarly a manifest to wrap it up would be helpful.
I would be grateful if someone would advise me of which release of poky
or open-embedded the meta-ettus and other dependent layers are required
to get bitbake to successfully build the image.
Regards
Walter
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
