What is this witchery?? Is this a reset to the <redacted> PCIe controller?

Nick

On Mon, Jul 23, 2018 at 10:44 AM Nate Temple <nate.tem...@ettus.com> wrote:

> Hi Jason,
>
> This magic poke should do the trick:
>
> python $UHD_INSTALL_DIR/firmware/usrp3/x300/x300_debug.py --addr=<IP Addr>
> --poke=0x100058 --data=1
>
>
> Regards,
> Nate Temple
>
> On Mon, Jul 23, 2018 at 9:45 AM, Nick Foster via USRP-users <
> usrp-users@lists.ettus.com> wrote:
>
>> I've solved this with the USB JTAG interface and an external machine. An
>> RPi will happily run Vivado Lab.
>>
>> AFAIK there are no plans to integrate a software reset into the X310.
>>
>> Nick
>>
>> On Mon, Jul 23, 2018 at 6:11 AM Jason Matusiak via USRP-users <
>> usrp-users@lists.ettus.com> wrote:
>>
>>> I know it has been questioned many times on here, but I wanted to verify
>>> something.  It has always been said that there is no way to do a software
>>> reset on the X310; I am curious if that is "currently" or "ever?"
>>>
>>> I wasn't sure if there was a way to send a packet either via UHD or
>>> RFNoC that could trigger a reset of some kind (this assumes that you have a
>>> functioning X310 on the other end), and no one has had time to look into
>>> it?  Or if it has been looked into and there truly is no way to do it.
>>>
>>> I have some situations where I cannot get to my X310s easily, so if I
>>> need to reflash the bitfile (which is going to be necessary for RFNoC
>>> flowgraphs, I will have to add an external appliance to get the job
>>> done.  I was thinking about looking into it, but if it already has and was
>>> deemed a non-starter, I don't want to waste the cycles.
>>> _______________________________________________
>>> USRP-users mailing list
>>> USRP-users@lists.ettus.com
>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users@lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>>
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to