I've solved this with the USB JTAG interface and an external machine. An RPi will happily run Vivado Lab.
AFAIK there are no plans to integrate a software reset into the X310. Nick On Mon, Jul 23, 2018 at 6:11 AM Jason Matusiak via USRP-users < usrp-users@lists.ettus.com> wrote: > I know it has been questioned many times on here, but I wanted to verify > something. It has always been said that there is no way to do a software > reset on the X310; I am curious if that is "currently" or "ever?" > > I wasn't sure if there was a way to send a packet either via UHD or RFNoC > that could trigger a reset of some kind (this assumes that you have a > functioning X310 on the other end), and no one has had time to look into > it? Or if it has been looked into and there truly is no way to do it. > > I have some situations where I cannot get to my X310s easily, so if I need > to reflash the bitfile (which is going to be necessary for RFNoC > flowgraphs, I will have to add an external appliance to get the job > done. I was thinking about looking into it, but if it already has and was > deemed a non-starter, I don't want to waste the cycles. > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
