Sorry, but I do not quite understand what you mean? 2018-06-11 16:56 GMT+03:00 Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] <konstantin.j.math...@nasa.gov>:
> I am currently having the same issue with the E310…. But I think you > should be using usrp3 directory… > > > > *From:* USRP-users [mailto:usrp-users-boun...@lists.ettus.com] *On Behalf > Of *Ivan Zahartchuk via USRP-users > *Sent:* Monday, June 11, 2018 9:49 AM > *To:* Derek Kozel <derek.ko...@ettus.com>; usrp-users < > usrp-users@lists.ettus.com> > *Subject:* Re: [USRP-users] USRP E313 > > > > Hello. I had a problem with installing and configuring RFNoc for the E313 > board. When I execute the uhd_images_downloader command on the board, it > gives me the address to download the rfnoc archive, but it produces the > following: > > [INFO] Images destination: / usr / local / share / uhd / images > > [INFO] No inventory file found at /usr/local/share/uhd/images/inventory.json. > Creating an empty one. > > 00006 kB / 00006 kB (100%) usrp1_b100_fw_default-g6bea23d.zip > > and in the future I don `t know what archive to download to me. Thanks for > the help. > > > > > > 2018-06-08 12:53 GMT+03:00 Derek Kozel <derek.ko...@ettus.com>: > > Hello Ivan, > > > > The antenna ports are named TX/RX and RX2 for channel 0 and 1, the same as > the B210. The standard USRP Source and Sink block will allow you to select > these antennas. This assumes that you are running GNU Radio on the USRP. > The ZMQ application note provides a way to move lower sample rate streams > to a remote computer. > > > > Regards, > > Derek > > > > On Fri, Jun 8, 2018 at 10:13 AM, Ivan Zahartchuk <adray0...@gmail.com> > wrote: > > Thanks for the help. Could you tell me more about how to access the ports > of RХ1, RX2 and ТХ1 ТХ2 in the gnuradio? > > > > 2018-06-06 12:17 GMT+03:00 Derek Kozel <derek.ko...@ettus.com>: > > Hello Ivan, > > Here are a few links to get you started. As an embedded computing device > you'll find the experience somewhat different from a B200. > > https://kb.ettus.com/Ettus_USRP_E300_Embedded_Family_ > Getting_Started_Guides > https://kb.ettus.com/Ettus_USRP_E300_Embedded_Family_Hardware_Resources > > https://kb.ettus.com/Software_Development_on_the_E310_and_E312 > https://kb.ettus.com/Streaming_processed_data_from_ > the_E31x_with_GNU_Radio_and_ZMQ > > Regards, > > Derek > > > > On Wed, Jun 6, 2018 at 8:40 AM, Ivan Zahartchuk via USRP-users < > usrp-users@lists.ettus.com> wrote: > > Hello. Recently I fell into the hands of the USRP E313. I'm interested in > a few questions about it. > 1. Is it possible to visualize the data that it processes? > 2. Is there any instruction for working and programming boards of this > kind? > I used to work with the USRP B200, but everything is a bit simpler there. > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > > > > > > > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
