Hello Ivan, The antenna ports are named TX/RX and RX2 for channel 0 and 1, the same as the B210. The standard USRP Source and Sink block will allow you to select these antennas. This assumes that you are running GNU Radio on the USRP. The ZMQ application note provides a way to move lower sample rate streams to a remote computer.
Regards, Derek On Fri, Jun 8, 2018 at 10:13 AM, Ivan Zahartchuk <adray0...@gmail.com> wrote: > Thanks for the help. Could you tell me more about how to access the ports > of RХ1, RX2 and ТХ1 ТХ2 in the gnuradio? > > 2018-06-06 12:17 GMT+03:00 Derek Kozel <derek.ko...@ettus.com>: > >> Hello Ivan, >> >> Here are a few links to get you started. As an embedded computing device >> you'll find the experience somewhat different from a B200. >> >> https://kb.ettus.com/Ettus_USRP_E300_Embedded_Family_Getting >> _Started_Guides >> https://kb.ettus.com/Ettus_USRP_E300_Embedded_Family_Hardware_Resources >> >> https://kb.ettus.com/Software_Development_on_the_E310_and_E312 >> https://kb.ettus.com/Streaming_processed_data_from_the_E31x_ >> with_GNU_Radio_and_ZMQ >> >> Regards, >> Derek >> >> On Wed, Jun 6, 2018 at 8:40 AM, Ivan Zahartchuk via USRP-users < >> usrp-users@lists.ettus.com> wrote: >> >>> Hello. Recently I fell into the hands of the USRP E313. I'm interested >>> in a few questions about it. >>> 1. Is it possible to visualize the data that it processes? >>> 2. Is there any instruction for working and programming boards of this >>> kind? >>> I used to work with the USRP B200, but everything is a bit simpler there. >>> >>> _______________________________________________ >>> USRP-users mailing list >>> USRP-users@lists.ettus.com >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>> >>> >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
