Hi Konstanti, the most common reason for that is actually a typo in the file name or in the path; can you verifying the file is actually readable (i.e. ls -l /home/rfnoc/rfnoc_tutorial/share/uhd/imagesusrp_e310_fpga_RFNOC_sg3.bit displays read privileges)?
Best regards, Marcus On Thu, 2018-05-31 at 13:44 +0000, Matheou, Konstantin J. (GRC- LCI0)[ZIN TECHNOLOGIES INC] wrote: > To All, > > I went through the process of creating my own bit file using the > rfnoc GUI tool. I am now trying to load it to the E310 using the > below command. > > uhd_usrp_probe > –args=’fpga=/home/rfnoc/rfnoc_tutorial/share/uhd/imagesusrp_e310_fpga > _RFNOC_sg3.bit > > See attached error screen shot. > > I was told I need to install the Section “Cross-Compiling rfnoc-devel > UHD” to be able to upload the bit file using the above command > > https://kb.ettus.com/Software_Development_on_the_E3xx_USRP_-_Building > _RFNoC_UHD_/_GNU_Radio_/_gr-ettus_from_Source > > > BUT, when I try to follow the instructions and install the SDK file, > I cannot because my machine is a 32-bit processor machine. > > Is there a work around? > > Thanks, > > Konstantin > > > > > _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
