Oops, re-added the wrong list there. Reposting to usrp-users with GNU Radio as BCC.
On Mon, May 28, 2018 at 2:24 PM, Derek Kozel <derek.ko...@ettus.com> wrote: > Hello Steve, > > Please keep the mailing list included unless you are talking about > something which requires privacy. GNU Radio runs natively on Windows. It is > not as well supported from an end developer stand point, but it is > available and with a bit of work can be a very viable answer. > https://wiki.gnuradio.org/index.php/InstallingGR#Windows > > Regards, > Derek > > On Mon, May 28, 2018 at 1:10 PM, shachar J. brown <shachar.br...@gmail.com > > wrote: > >> Hi Derek, >> >> I am unfamiliar with such functionality: >> How can I run a full gnuradio flow graph via windows? >> >> Thanks, >> Steve >> >> On Mon, May 28, 2018 at 3:02 PM, Derek Kozel <derek.ko...@ettus.com> >> wrote: >> >>> Hello Steve, >>> >>> Can you directly use the X310 from the Windows PC? UHD is fully >>> supported on Windows 7 to 10. >>> >>> Regards, >>> Derek >>> >>> On Mon, May 28, 2018 at 12:09 PM, shachar J. brown via USRP-users < >>> usrp-users@lists.ettus.com> wrote: >>> >>>> Thanks Marcus, I got it to work just fine. >>>> >>>> Your remark is a little concerning... is there any more efficient way >>>> to send data over the internet? >>>> >>>> Furthermore, I actually don't necessarily need to pass the samples over >>>> the internet. I simply need to send the samples directly from the X310 to a >>>> windows PC at high rate (Employer's demands, non-negotiable). >>>> Is there any way to get around this problem? for instance, instead of >>>> the internet to construct some communication box? I've never dealt with >>>> such things before.... >>>> >>>> Thanks again, >>>> Steve >>>> >>>> On Mon, May 28, 2018 at 12:37 AM, Marcus Müller < >>>> marcus.muel...@ettus.com> wrote: >>>> >>>>> Hi Steve, >>>>> >>>>> That's a pretty network-centric question! >>>>> >>>>> So, first of all, you need to make sure you can actually send IP >>>>> packets from one computer to the other - that will require figuring out >>>>> the >>>>> public IP address of the server end of the connection, making sure the >>>>> firewall on that computer allows for connections to that port, and also >>>>> make sure that if any routers are in between (especially if they do >>>>> NAT/masquerading), that these will forward the packets. >>>>> >>>>> As a side remark: even the lowest sample rate possible on an X310, >>>>> which is 195.3125 kS/s, will require that the sending end has more than >>>>> 6.25 Mb/s of continuously available uplink. That is actually not that >>>>> little, so unprocessed samples are seldom what you'd want to send over the >>>>> internet! >>>>> >>>>> Best regards, >>>>> Marcus >>>>> >>>>> On 27 May 2018 16:45:22 GMT+02:00, "shachar J. brown via USRP-users" < >>>>> usrp-users@lists.ettus.com> wrote: >>>>>> >>>>>> Hi all, >>>>>> >>>>>> Disclaimer: I have never used zmq before. >>>>>> >>>>>> My goal is to control a X310 from a remote PC, and receive data. >>>>>> using ZMQ. >>>>>> >>>>>> I downloaded the simple example zmq_stream.grc: >>>>>> https://github.com/gnuradio/gnuradio/blob/master/gr-zeromq/e >>>>>> xamples/zmq_stream.grc >>>>>> >>>>>> I ran the flow-graph on two different pc's, both connected to the >>>>>> web. The first pc had the PUB/PUSH/REP blocks, while the second had the >>>>>> SUB/PULL/REQ blocks. Quite frankly, the signal hasn't reached the second >>>>>> pc. >>>>>> >>>>>> How do I ensure both pc's are subscribed one to another? >>>>>> Anything else I got wrong? >>>>>> >>>>>> TIA, >>>>>> Steve >>>>>> >>>>> >>>>> -- >>>>> This was written on my cellular phone. whilst an impressive piece of >>>>> engineering, this might not be the perfect device to write emails on - >>>>> please excuse my brevity. >>>>> >>>> >>>> >>>> _______________________________________________ >>>> USRP-users mailing list >>>> USRP-users@lists.ettus.com >>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>>> >>>> >>> >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
