Hello Koen, To extend Marcus' answer, here is a link to the example with three areas of particular interest highlighted.
https://github.com/EttusResearch/uhd/blob/rfnoc-devel/host/examples/rfnoc_rx_to_file.cpp#L292 https://github.com/EttusResearch/uhd/blob/rfnoc-devel/host/examples/rfnoc_rx_to_file.cpp#L370 https://github.com/EttusResearch/uhd/blob/rfnoc-devel/host/examples/rfnoc_rx_to_file.cpp#L393 Regards, Derek On Wed, May 23, 2018 at 8:24 PM, Marcus D. Leech via USRP-users < usrp-users@lists.ettus.com> wrote: > On 05/23/2018 04:55 AM, TIMMEN Koen via USRP-users wrote: > > > All online help I could find explains me how to create custom IP and use > this in combination with the target images provided, which then require me > to use gnuradio again. If someone could verify or correct my current > understanding of the project or perhaps point me to resources I overlooked, > it would be greatly appreciated. > > > > Kind regards, > > > > Koen > > There is no requirement to use Gnu Radio to manage RFNoC signal flows. > > There are examples in UHD, like: > > rfnoc_rx_to_file > > And there are probably others on this list who have done RFNoC work > without Gnu Radio at all who might be able to share example code. > > > > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
