Hi Marcus,

Thanks a lot! What GPSDO do you recommend? We need to buy one.

Best regards,
Alejandro

2018-04-06 16:00 GMT+02:00 Marcus D. Leech <mle...@ripnet.com>:

> On 04/06/2018 08:29 AM, ALEJANDRO BLANCO PIZARRO wrote:
>
> Hi all, Marcus,
>
> Thanks for the answer, it was really useful. Now, I am trying to generate
> the 10Mhz signal using a vector signal generator, but the signal is nor
> really pure because the signal generator bandwidth is only 60MHz. Also, the
> Vpp of the signal is 1.4 V, is it correct?
>
> If someone can see the signal (in attached) and tell me if I can use it as
> an external clock, it will be really helpful.
>
> Best regards,
> Alejandro
>
> What is the stability of your vector signal generator?  I suspect that
> it's much worse than the on-board clocks.
>
> You'd do better to use an external GPSDO to feed to your two X310.
>
>
>
> 2018-04-05 16:34 GMT+02:00 Marcus D. Leech via USRP-users <
> usrp-users@lists.ettus.com>:
>
>> On 04/05/2018 06:20 AM, ALEJANDRO BLANCO PIZARRO via USRP-users wrote:
>>
>>> Dear community,
>>>
>>> I would like to add an external clock to two USRP in order to have the
>>> same clock discarding possible synchronization issues. The desirable
>>> frequency of the clock would be 184 MHz (compatible with LTE).
>>>
>>> And I was wondering about what will be the possible solutions:
>>>
>>> --> It is possible to use a sine signal with a desirable frequency as an
>>> external clock? In this case what will the amplitude of the signal be?
>>> Unfortunately, I do not have a PWM generator in order to use it as a clock.
>>>
>>> --> It is possible to use another USRP as an external clock using a
>>> transmit basic daughterboard ?
>>>
>>> Thanks you so much in advance.
>>>
>>> Best regards,
>>> Alejandro
>>>
>>> X310 supports an external clock already, via the 10MHz front-panel
>> input.   The master clock (which can be 184.32Mhz, to support LTE) is then
>> derived
>>   from that.   Just feed a 10Mhz clock to all your X310s.
>>
>> See:
>>
>> https://kb.ettus.com/Synchronization_and_MIMO_Capability_wit
>> h_USRP_Devices
>>
>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users@lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>
>
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to