Hello Everyone, I've successfully installed RFNoC for e312. but after running uhd_usrp_probe I am getting an error - [ERROR] [UHD] Exception caught in safe-call.
the same Exception is coming when I run the UHD example ./rx_samples_to_file I am using UHD: UHD_4.0.0.rfnoc-devel-409-gec9138eb GNURADIO: 3.7.12git-361-g713629cc GR_ETTUS: branch master/ root@ettus-e3xx-sg3:~# uhd_usrp_probe [INFO] [UHDlinux; GNU C++ version 5.2.0; Boost_105800; UHD_4.0.0.rfnoc-devel-409-gec9138eb] [INFO] [E300] Loading FPGA image: /usr/share/uhd/images/usrp_ e310_fpga_sg3.bit... [INFO] [E300] FPGA image loaded [INFO] [E300] Initializing core control (global registers)... [INFO] [E300] Performing register loopback test... [INFO] [E300] Register loopback test passed [INFO] [RFNOC RADIO] Register loopback test passed [INFO] [RFNOC RADIO] Register loopback test passed [WARNING] [RFNOC] [0/fosphor_0] defines 2 input buffer sizes, but 1 input ports [INFO] [AD936X] Performing CODEC loopback test... [INFO] [AD936X] CODEC loopback test passed [INFO] [AD936X] Performing CODEC loopback test... [INFO] [AD936X] CODEC loopback test passed [INFO] [CORES] Performing timer loopback test... [INFO] [CORES] Timer loopback test passed _____________________________________________________ / | Device: E-Series Device | _____________________________________________________ | / | | Mboard: E3XX | | product: 30675 | | revision: 6 | | serial: 312EE16 | | mac-addr: 00:80:2f:17:d1:46 | | FPGA Version: 255.0 | | FPGA git hash: f764326-dirty | | RFNoC capable: Yes | | | | Time sources: none, internal, external | | Clock sources: internal | | Sensors: temp, ref_locked | | _____________________________________________________ | | / | | | RX DSP: 0 | | | | | | Freq range: 0.000 to 0.000 MHz | | _____________________________________________________ | | / | | | RX DSP: 1 | | | | | | Freq range: 0.000 to 0.000 MHz | | _____________________________________________________ | | / | | | RX Dboard: A | | | ID: E310 MIMO XCVR (0x0110) | | | Serial: 312CB16 | | | _____________________________________________________ | | | / | | | | RX Frontend: A | | | | Name: FE-RX2 | | | | Antennas: TX/RX, RX2 | | | | Sensors: temp, rssi, lo_locked | | | | Freq range: 50.000 to 6000.000 MHz | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB | | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Frontend: B | | | | Name: FE-RX1 | | | | Antennas: TX/RX, RX2 | | | | Sensors: temp, rssi, lo_locked | | | | Freq range: 50.000 to 6000.000 MHz | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB | | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Codec: A | | | | Name: E3x0 RX dual ADC | | | | Gain Elements: None | | _____________________________________________________ | | / | | | TX DSP: 0 | | | | | | Freq range: 0.000 to 0.000 MHz | | _____________________________________________________ | | / | | | TX DSP: 1 | | | | | | Freq range: 0.000 to 0.000 MHz | | _____________________________________________________ | | / | | | TX Dboard: A | | | ID: E310 MIMO XCVR (0x0110) | | | Serial: 312CB16 | | | _____________________________________________________ | | | / | | | | TX Frontend: A | | | | Name: FE-TX2 | | | | Antennas: TX/RX | | | | Sensors: temp, lo_locked | | | | Freq range: 50.000 to 6000.000 MHz | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB | | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Frontend: B | | | | Name: FE-TX1 | | | | Antennas: TX/RX | | | | Sensors: temp, lo_locked | | | | Freq range: 50.000 to 6000.000 MHz | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB | | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Codec: A | | | | Name: E3x0 TX dual DAC | | | | Gain Elements: None | | _____________________________________________________ | | / | | | RFNoC blocks on this device: | | | | | | * Radio_0 | | | * FIFO_0 | | | * Window_0 | | | * FFT_0 | | | * fosphor_0 | | | * FIFO_1 | | | * FIR_0 [INFO] [E300] Loading FPGA image: /usr/share/uhd/images/usrp_ e3xx_fpga_idle_sg3.bit... [INFO] [E300] FPGA image loaded [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 [ERROR] [UHD] Exception caught in safe-call. in virtual ctrl_iface_impl::~ctrl_iface_impl() at /home/harshit/rfnoc/src/uhd/host/lib/rfnoc/ctrl_iface.cpp:76 this->peek32(0); -> AssertionError: (sts >> 7) & 0x1 in typename T::sptr e300_transport::get_buff(double) [with T = uhd::transport::managed_send_buffer; typename T::sptr = boost::intrusive_ptr<uhd::transport::managed_send_buffer>] at /home/harshit/rfnoc/src/uhd/host/lib/usrp/e300/e300_fifo_config.cpp:257 -- *DISCLAIMER* THIS MESSAGE, TOGETHER WITH ANY ATTACHMENTS, IS CONFIDENTIAL, IS INTENDED ONLY FOR THE USE OF THE ADDRESSEE(S), AND MAY HAVE INFORMATION THAT IS COVERED BY LEGAL, PROFESSIONAL OR OTHER PRIVILEGE. ANY OPINIONS EXPRESSED, IMPLIED, OR PRESENTED ARE SOLELY THOSE OF THE AUTHOR AND ARE NOT THOSE OF PRETLIST. IF YOU ARE NOT THE INTENDED RECIPIENT, THEN PLEASE DESTROY THIS EMAIL AND ITS ATTACHMENTS, AND LET US KNOW AT ONCE. ANY COPYING, DISTRIBUTION OR USE OF THIS EMAIL, ITS ATTACHMENTS, OR ANY INFORMATION CONTAINED HERE IS PROHIBITED.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
