Hi Kyeong,Thanks for the info.. I'll try to find the article..
Regards,
Angilberto.
Em segunda-feira, outubro 23, 2017, 5:08 PM, Kyeong Su Shin <kss...@uw.edu>
escreveu:
Hello Angilberto Muniz:
An alternative to this is to modify the USRP 1 motherboard (instead of the
dauthgerboard). There used to be a GNURadio wiki page about this
("USRPSerialBelow500"), but it is apparently gone. You can still find some old
e-mail archives and Chinese articles (with images) regarding this.
Regards,
Kyeong Su Shin
On Mon, Oct 23, 2017 at 11:16 AM, Angilberto Muniz Sb via USRP-users
<usrp-users@lists.ettus.com> wrote:
Hi,I have a USRP1 Rev2 board and a FLEX900 dboard. The flex900 works fine with
USRP1 Rev4.5, but wont work with USRP1 Rev2.
I read somewhere that I shoud modify the flex900 to make it work with USRP1
Rev2.
The problem is I read two different tips...
in "https://files.ettus.com/ manual/page_dboards.html# dboards_rfxmod" it says:
"...move R35 to R36 and move R117 to R115..."
in "https://lists.gnu.org/ archive/html/discuss-gnuradio/
2009-04/msg00518.html" it says:
".. move R36 to R34 and move R115 to R116..."
Any help?
Thank you,
Angilberto.
______________________________ _________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/ mailman/listinfo/usrp-users_ lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
