On 10/23/2017 02:16 PM, Angilberto Muniz Sb via USRP-users wrote:
Hi,
I have a USRP1 Rev2 board and a FLEX900 dboard. The flex900 works fine
with USRP1 Rev4.5, but wont work with USRP1 Rev2.
I read somewhere that I shoud modify the flex900 to make it work with
USRP1 Rev2.
The problem is I read two different tips...
in "https://files.ettus.com/manual/page_dboards.html#dboards_rfxmod";
it says:
"...move R35 to R36 and move R117 to R115..."
I'd try the above first.
But keep in mind that a "FlexXXX" board will be over a decade old (!!!)
at this point, and the USRP1 is EOL.
*in
"**https://lists.gnu.org/archive/html/discuss-gnuradio/2009-04/msg00518.html";
it says:*
*
*
*".. move R36 to R34 and move R115 to R116..."*
*
*
*Any help?*
Thank you,
Angilberto.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
