I am trying to build an d run fosphor on my e310 (sg1) I used the getting started guide ( https://kb.ettus.com/Getting_Started_with_RFNoC_Development), successfully built the block, and copied it over to the directory ~/rfnoc on the e310. When I run this command:
$ uhd_usrp_probe --args="fpga=/home/root/rfnoc/usrp_e310_fpga_RFNOC.bit" I get: >>> linux; GNU C++ version 5.2.0; Boost_105800; UHD_003.010.001.001-release -- Loading FPGA image: /home/root/rfnoc/usrp_e310_fpga_RFNOC.bit... done -- Detecting internal GPSDO .... found -- Initializing core control... -- Performing register loopback test... pass Error: RuntimeError: Expected FPGA compatibility number 16.x, but got 255.0: The FPGA build is not compatible with the host code build. Please run: "/usr/lib/uhd/utils/uhd_images_downloader.py" >>> So I run $ /usr/lib/uhd/utils/uhd_images_downloader.py and try it to load the bit file again, with the same results. Anyone know what I need to do? -Thanks, Alex Young -- Alexander Young Senior Systems Engineer | Echo Ridge, LLC alex.yo...@echoridgenet.com | 703.437.0404
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
