Hi Yuping
A simple way to do it is to put in your initialization files,
which are hidden ("dot files") in your home directory.
It depends on the shell you use (do 'echo $SHELL' to see).
If bash,
.bashrc
export PATH=/usr/local/openmpi1.6.5/bin:${PATH}
export LD_LIBRARY_PATH=/usr/local/openmpi1.6.5/lib:${LD_LIBRARY_PATH}
If csh/tcsh
.cshrc/.tcshrc
setenv PATH /usr/local/openmpi1.6.5/bin:${PATH}
setenv LD_LIBRARY_PATH /usr/local/openmpi1.6.5/lib:${LD_LIBRARY_PATH}
Are you running the programs in a single machine,
or is it a cluster or some farm or networked machines?
In the second case, you need to make sure your home directory
is shared across the machines, or if it is not shared,
you need to make the modifications above in each machine.
I hope this helps.
Gus Correa
On 07/25/2013 03:11 PM, Yuping Sun wrote:
Hi Gus:
I went back and set the PATH and LD_LIBRARY_PATH following the FAQ answer.
However, it did not change anything.
What else can you suggest?
Thank you.
Yuping
-----Original Message-----
From: users-boun...@open-mpi.org [mailto:users-boun...@open-mpi.org] On Behalf
Of Gus Correa
Sent: Wednesday, July 24, 2013 8:28 PM
To: Open MPI Users
Subject: Re: [OMPI users] errors testing openmpi1.6.5 ----
Hi Yuping
Did you set your PATH and LD_LIBRARY_PATH?
Please, see these FAQ:
http://www.open-mpi.org/faq/?category=running#run-prereqs
http://www.open-mpi.org/faq/?category=running#adding-ompi-to-path
I hope this helps,
Gus Correa
On 07/24/2013 08:09 PM, Yuping Sun wrote:
Dear All:
I downloaded openmpi1.5.6 and installed on my linux workstation with
the help of NASA engineer. Then I tried to test the openmpi
installation, but get the following error message:
[ysun@ysunrh mpi]$ which mpiexec
/usr/local/openmpi1.6.5/bin/mpiexec
[ysun@ysunrh mpi]$ mpiexec utils/MPIcheck/mpicheck
[ysunrh.fdwt.com:24905] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_paffinity_hwloc: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24905] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_carto_auto_detect:
lt_dlerror() returned NULL! (ignored)
[ysunrh.fdwt.com:24905] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_carto_file: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24905] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_shmem_mmap: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24905] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_shmem_posix: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24905] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_shmem_sysv: lt_dlerror()
returned NULL! (ignored)
----------------------------------------------------------------------
----
It looks like opal_init failed for some reason; your parallel process
is
likely to abort. There are many reasons that a parallel process can
fail during opal_init; some of which are due to configuration or
environment problems. This failure appears to be an internal failure;
here's some additional information (which may only be relevant to an
Open MPI developer):
opal_shmem_base_select failed
--> Returned value -1 instead of OPAL_SUCCESS
----------------------------------------------------------------------
----
[ysunrh.fdwt.com:24905] [[INVALID],INVALID] ORTE_ERROR_LOG: Error in
file runtime/orte_init.c at line 79
[ysunrh.fdwt.com:24905] [[INVALID],INVALID] ORTE_ERROR_LOG: Error in
file orterun.c at line 694
I also try the use ompi_info to get more information, and it give me a
lot error messages and I listed some below:
[ysunrh.fdwt.com:24920] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_osc_pt2pt: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24920] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_osc_rdma: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24920] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_btl_self: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24920] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_btl_sm: lt_dlerror() returned
NULL! (ignored)
[ysunrh.fdwt.com:24920] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_btl_tcp: lt_dlerror() returned
NULL! (ignored)
[ysunrh.fdwt.com:24920] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_topo_unity: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24920] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_pubsub_orte: lt_dlerror()
returned NULL! (ignored)
[ysunrh.fdwt.com:24920] mca: base: component_find: unable to open
/usr/local/openmpi1.6.5/lib/openmpi/mca_dpm_orte: lt_dlerror()
returned NULL! (ignored)
MCA backtrace: execinfo (MCA v2.0, API v2.0, Component v1.6.5)
MCA memory: linux (MCA v2.0, API v2.0, Component v1.6.5)
MCA timer: linux (MCA v2.0, API v2.0, Component v1.6.5)
MCA installdirs: env (MCA v2.0, API v2.0, Component v1.6.5)
MCA installdirs: config (MCA v2.0, API v2.0, Component v1.6.5)
MCA hwloc: hwloc132 (MCA v2.0, API v2.0, Component v1.6.5)
Could anyone of you give me some help, and tell me what I need to do
to install openmpi correctly or give me some instructions to make it
working? Thank you.
*/Yuping Sun/*
FloDesign Wind Turbine Corp
242 Sturbridge Road
Charlton, MA 01507
Direct: 508-434-1507
Cell: 713-456-9420
y...@fdwt.com<mailto:y...@fdwt.com>
Description: cid:3300779197_294562
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
