One more thing I'm getting message on my mobile number as well submit
report.
Thanks
Ammar Ali
On Sat, Apr 18, 2015 at 4:41 PM, Ammar Ali <ammarali3...@gmail.com> wrote:
> This is my kannel configuration
> #-------------------------------------------------
> # THIS IS A CONFIGURATION FOR KANNEL SMS Gateway
> #-------------------------------------------------
> # Single Group "CORE"
> #-------------------------------------------------
>
> group = core
> admin-port = "13000"
> admin-port-ssl="no"
> admin-password = "xxxxxxxx"
> status-password = "xxxxxxxx"
> admin-deny-ip="*.*.*.*"
> admin-allow-ip="*.*.*.*"
> smsbox-interface ="127.0.0.1"
> smsbox-port = "13001"
> #smsbox-port-ssl="no"
> log-file = "/home/bulksms/public_html/kannel/logs/kannel1.log"
> log-level = "0"
> access-log = "/home/bulksms/public_html/kannel/logs/access1.access"
> dlr-storage = "internal"
> sms-incoming-queue-limit = "-1"
> sms-outgoing-queue-limit = "1000000"
> smsbox-max-pending = "100"
> sms-resend-freq = "60"
> sms-resend-retry = "-1"
>
> #-------------------------------------------------
> # Single Group "smsbox"
> #-------------------------------------------------
>
> group = smsbox
> smsbox-id = "smsbox"
> bearerbox-host = "127.0.0.1"
> bearerbox-port = "15001"
> sendsms-port = "15010"
> log-file = "/home/bulksms/public_html/kannel/logs/smsbox1.log"
> log-level = "0"
> access-log="/home/bulksms/public_html/kannel/logs/smsaccess1.access"
> sendsms-chars = "0123456789+ "
> #max-pending-requests = "512"
> sendsms-url="/cgi-bin/sendsms"
> #global-sender = "123456"
> #ms-length = "140"
> #http-request-retry=5
> mo-recode='1'
>
> #-------------------------------------------------
> # Multi Group "SMSC"
> #-------------------------------------------------
>
> group = smsc
> smsc = "smpp"
> smsc-id = "vmobi_tsmsc"
> log-file = "/home/bulksms/public_html/kannel/logs/vmobi_tsmsc1.log"
> log-level = "0"
> host = "xxx.xxx.xxx.xxx"
> port = "xxxx"
> #receive-port="xxxx"
> smsc-username = "xxxxxx"
> smsc-password = "xxxxxx"
> allowed-smsc-id = "vmobi_tsmsc"
> preferred-smsc-id = "vmobi_tsmsc"
> source-addr-ton = "0"
> source-addr-npi = "1"
> dest-addr-ton = "1"
> dest-addr-npi = "1"
> service-type = "CMT"
> system-type = "VMA"
> alt-charset="ASCII"
> enquire-link-interval = "120"
> reconnect-delay = "0"
> transceiver-mode = "true"
> interface-version = "34"
> connection-timeout = "0"
> throughput = "100"
> reroute-dlr=true
>
> #-------------------------------------------------
> # Multi Group "smsbox-route"
> #-------------------------------------------------
>
> group = smsbox-route
> smsbox-id = "smsbox"
> smsc-id = "vmobi_tsmsc"
>
> #-------------------------------------------------
> # Multi Group "sms-service"
> # There should be always a 'default' service.
> # This service is used when no other 'sms-service' is applied.
> #-------------------------------------------------
>
> group = sms-service
> keyword = default
> text = "No service specified"
> accept-x-kannel-headers = true
> #max-messages = 3
> concatenation = true
> catch-all = true
>
> #-------------------------------------------------
> # Multi Group "sendsms-user"
> #-------------------------------------------------
>
> group = sendsms-user
> name = "sendsmsuser1"
> username = "tester1"
> password = "tester1"
> forced-smsc = "vmobi_tsmsc"
> #default-smsc= "vmobi_tsmsc"
> #user-allow-ip="*.*.*.*"
> max-messages="10"
>
> #-------------------------------------------------
>
> Please If there is an issue then let me know.
>
>
> Thanks
> Ammar Ali
>
>
> On Sat, Apr 18, 2015 at 4:32 PM, Cliff Court <cco...@telkomsa.net> wrote:
>
>> Hi Ammar
>>
>> If you aren't getting a deliver_sm, it sounds like there is an issue with
>> the SMSC rather than anything you are doing or configuring. You are
>> requesting a "registered-delivery" so I would expect the deliver_sm.
>>
>> Is your SMS message reaching your test mobile phone? If it isn't, you
>> would need to wait for an expiry or failed deliver_sm status, but that
>> could take several hours (or days in some cases)
>>
>>
>> On 2015/04/18 12:34 PM, Ammar Ali wrote:
>>
>> For Your Information:
>>
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: type_name: *submit_sm*
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: command_id: 4 = 0x00000004
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: command_status: 0 = 0x00000000
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: sequence_number: 2 = 0x00000002
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: service_type: "CMT"
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: source_addr_ton: 5 = 0x00000005
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: source_addr_npi: 0 = 0x00000000
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: source_addr: "IAMFCP"
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: dest_addr_ton: 1 = 0x00000001
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: dest_addr_npi: 1 = 0x00000001
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: destination_addr: "9039238251"
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: esm_class: 3 = 0x00000003
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: protocol_id: 0 = 0x00000000
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: priority_flag: 0 = 0x00000000
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: schedule_delivery_time: NULL
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: validity_period: NULL
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: registered_delivery: 1 =
>> 0x00000001
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: replace_if_present_flag: 0 =
>> 0x00000000
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: data_coding: 0 = 0x00000000
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: sm_default_msg_id: 0 = 0x00000000
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: sm_length: 5 = 0x00000005
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: short_message: "hello"
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: SMPP PDU dump ends.
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: SMPP[newtsmsc]: throughput
>> (1.00,100.00)
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: SMPP[newtsmsc]: throughput
>> (1.00,100.00)
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: SMPP[newtsmsc]: Got PDU:
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: SMPP PDU 0x7f2838001700 dump:
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: type_name: *submit_sm_resp*
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: command_id: 2147483652 =
>> 0x80000004
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: command_status: 0 = 0x00000000
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: sequence_number: 2 = 0x00000002
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: message_id:
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: Octet string at 0x7f2838001150:
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: len: 36
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: size: 37
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: immutable: 0
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: data: 35 38 37 64 30 36 30 39
>> 2d 35 33 34 61 2d 34 65 587d0609-534a-4e
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: data: 66 38 2d 39 63 37 63 2d
>> 37 39 33 30 61 63 37 61 f8-9c7c-7930ac7a
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: data: 39 33 37
>> 61 937a
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: Octet string dump ends.
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: SMPP PDU dump ends.
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: DLR[internal]: Adding DLR
>> smsc=newtsmsc, ts=587d0609-534a-4ef8-9c7c-7930ac7a937a, src=IAMFCP,
>> dst=9039238251, mask=31, boxc=smsbox
>> 2015-04-18 15:52:36 [7282] [9] DEBUG: SMPP[newtsmsc]: throughput
>> (1.00,100.00)
>> 2015-04-18 15:54:09 [7282] [9] DEBUG: SMPP[newtsmsc]: Sending enquire
>> link:
>> 2015-04-18 15:54:09 [7282] [9] DEBUG: SMPP PDU 0x7f2838001700 dump:
>>
>>
>>
>> On Sat, Apr 18, 2015 at 4:01 PM, Ammar Ali <ammarali3...@gmail.com>
>> wrote:
>>
>>> *Hello** Cliff,*
>>>
>>> I'm sending sms using SQLBox, and I'm inserting message into send_sms
>>> table with dlr_mask=31.
>>>
>>> But When I'm seeing my log files there is no *delivery_sm* packet for
>>> delivery report.
>>>
>>>
>>> *This is the sql query for insertion:*
>>>
>>> INSERT INTO send_sms (momt, sender, receiver, msgdata, sms_type,
>>> smsc_id, dlr_mask)
>>> VALUES ('MT', 'TESTIN', '9039238251, 'SQLBOX TESTING SERVER', 2,
>>> 'newtsmsc', 31);
>>>
>>>
>>> Please suggest me that how to get this delivery report.
>>>
>>>
>>> Thanks
>>> Ammar Ali
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Sat, Apr 18, 2015 at 3:40 PM, Cliff Court <cco...@telkomsa.net>
>>> wrote:
>>>
>>>> If you are using sendsms to send messages , are you including the
>>>> dlr-mask and dlr-url in URL parameters?
>>>>
>>>> e.g. set dlr-mask=31 (for all reports) and dlr-url must be set for a
>>>> script that can store your dlr data
>>>>
>>>> Thanks
>>>> Cliff
>>>>
>>>>
>>>> On 2015/04/18 08:34 AM, Ammar Ali wrote:
>>>>
>>>> I'm not getting Delivery Report.
>>>>
>>>> On Sat, Apr 18, 2015 at 12:04 PM, Ammar Ali <ammarali3...@gmail.com>
>>>> wrote:
>>>>
>>>>> Hello Team,
>>>>>
>>>>> I had some issue with delivery reports. I configured smsc
>>>>> configuration for transmit and receiving sms and dlr.
>>>>>
>>>>>
>>>>>
>>>>> *This is my configuration: *group = smsc
>>>>> smsc = smpp
>>>>> smsc-id = tx_smsc
>>>>> host= xxx.xxx.xxx.xxx
>>>>> smsc-username= xxxxxx
>>>>> smsc-password= xxxx
>>>>> port = 2775
>>>>> #receive-port= 2775
>>>>> connect-allow-ip = 127.0.0.1
>>>>> system-type="SMPP"
>>>>> address-range=""
>>>>> alt-charset=1
>>>>> alt-charset="ASCII"
>>>>> source-addr-ton=1
>>>>> source-addr-npi=1
>>>>> dest-addr-ton=1
>>>>> dest-addr-npi=1
>>>>> #transceiver-mode=1
>>>>> allowed-smsc-id=newtsmsc
>>>>> throughput= 40
>>>>> log-file =/home/bulksms/public_html/kannel/logs/new_tsmsc1.log
>>>>> log-level = 0
>>>>>
>>>>> -----------------------------------------------------------------------------------------------------
>>>>> group = smsc
>>>>> smsc = smpp
>>>>> smsc-id = rx_smsc
>>>>> host= xxx.xxx.xxx.xxx
>>>>> smsc-username= xxxxxxx
>>>>> smsc-password= xxxxxxx
>>>>> #port = 2775
>>>>> receive-port= 2775
>>>>> connect-allow-ip = 127.0.0.1
>>>>> system-type="SMPP"
>>>>> address-range=""
>>>>> alt-charset="ASCII"
>>>>> source-addr-ton=1
>>>>> source-addr-npi=1
>>>>> dest-addr-ton=1
>>>>> dest-addr-npi=1
>>>>> #transceiver-mode=1
>>>>> allowed-smsc-id=newtrsmsc
>>>>> log-file =/home/bulksms/public_html/kannel/logs/new_trsmsc1.log
>>>>> log-level = 0
>>>>>
>>>>> Can you suggest me where is the actual problem in my configuration.
>>>>>
>>>>>
>>>>>
>>>>> Thanks
>>>>> Ammar Ali
>>>>> FRAMP Technology
>>>>> Pune (MH)
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
