I'm not getting Delivery Report. On Sat, Apr 18, 2015 at 12:04 PM, Ammar Ali <ammarali3...@gmail.com> wrote:
> Hello Team, > > I had some issue with delivery reports. I configured smsc configuration > for transmit and receiving sms and dlr. > > > > *This is my configuration:*group = smsc > smsc = smpp > smsc-id = tx_smsc > host= xxx.xxx.xxx.xxx > smsc-username= xxxxxx > smsc-password= xxxx > port = 2775 > #receive-port= 2775 > connect-allow-ip = 127.0.0.1 > system-type="SMPP" > address-range="" > alt-charset=1 > alt-charset="ASCII" > source-addr-ton=1 > source-addr-npi=1 > dest-addr-ton=1 > dest-addr-npi=1 > #transceiver-mode=1 > allowed-smsc-id=newtsmsc > throughput= 40 > log-file =/home/bulksms/public_html/kannel/logs/new_tsmsc1.log > log-level = 0 > > ----------------------------------------------------------------------------------------------------- > group = smsc > smsc = smpp > smsc-id = rx_smsc > host= xxx.xxx.xxx.xxx > smsc-username= xxxxxxx > smsc-password= xxxxxxx > #port = 2775 > receive-port= 2775 > connect-allow-ip = 127.0.0.1 > system-type="SMPP" > address-range="" > alt-charset="ASCII" > source-addr-ton=1 > source-addr-npi=1 > dest-addr-ton=1 > dest-addr-npi=1 > #transceiver-mode=1 > allowed-smsc-id=newtrsmsc > log-file =/home/bulksms/public_html/kannel/logs/new_trsmsc1.log > log-level = 0 > > Can you suggest me where is the actual problem in my configuration. > > > > Thanks > Ammar Ali > FRAMP Technology > Pune (MH) > > > >
