Dear Ammar, Configuration seems ok.
How many TX and RX or TRX connection is allowed by your smpp provider? Regards Tapan Thapa On Wed, Apr 22, 2015 at 12:46 PM, Ammar Ali <ammarali3...@gmail.com> wrote: > Hello Tapan, > > > This is SMSC configuration for each instances: > > group = smsc > smsc = "smpp" > smsc-id = "TR_SMSC1" > log-file = "/var/log/TR_SMSC1_lOG1.log" > log-level = "0" > host = "xxx.xxx.xxx.xxx" > port = "xxxx" > #receive-port="xxxx" > smsc-username = "xxxxxxxx" > smsc-password = "xxxxx" > allowed-smsc-id = "TR_SMSC1" > preferred-smsc-id = "TR_SMSC1" > source-addr-ton = "0" > source-addr-npi = "1" > dest-addr-ton = "1" > dest-addr-npi = "1" > service-type = "CMT" > system-type = "VMA" > #address-range = "^$" > #bind-addr-ton = "0" > #bind-addr-npi = "0" > enquire-link-interval = "120" > reconnect-delay = "0" > transceiver-mode = "true" > interface-version = "34" > connection-timeout = "0" > throughput = "100" > reroute-dlr=true > > > > > Thanks > Ammar Ali > > > > > On Wed, Apr 22, 2015 at 12:39 PM, Ammar Ali <ammarali3...@gmail.com> > wrote: > >> Hello >> >> This is my configurations for each instances: >> >> *Kannel1* >> group = core >> admin-port = "13000" >> admin-port-ssl="no" >> admin-password = "xxxxxxx" >> status-password = "xxxxxxx" >> admin-deny-ip="*.*.*.*" >> admin-allow-ip="*.*.*.*" >> smsbox-interface ="127.0.0.1" >> smsbox-port = "13001" >> log-file = "/var/log/kannel1.log" >> log-level = "0" >> access-log = "/var/log/access1.access" >> dlr-storage = "mysql" >> sms-incoming-queue-limit = "-1" >> sms-outgoing-queue-limit = "1000000" >> smsbox-max-pending = "100" >> sms-resend-freq = "60" >> sms-resend-retry = "-1" >> >> group = smsbox >> smsbox-id = "smsbox1" >> bearerbox-host = "127.0.0.1" >> bearerbox-port = "13001" >> sendsms-port = "13010" >> log-file = "/var/log/smsbox1.log" >> log-level = "0" >> access-log="/var/log/smsaccess1.access" >> sendsms-chars = "0123456789+ " >> #max-pending-requests = "512" >> sendsms-url="/cgi-bin/sendsms" >> #global-sender = "123456" >> #ms-length = "140" >> #http-request-retry=5 >> mo-recode='1' >> >> *Kannel2* >> group = core >> admin-port = "13100" >> admin-port-ssl="no" >> admin-password = "xxxxxxx" >> status-password = "xxxxxxx" >> admin-deny-ip="*.*.*.*" >> admin-allow-ip="*.*.*.*" >> smsbox-interface ="127.0.0.2" >> smsbox-port = "13101" >> log-file = "/var/log/kannel2.log" >> log-level = "0" >> access-log = "/var/log/access2.access" >> dlr-storage = "mysql" >> sms-incoming-queue-limit = "-1" >> sms-outgoing-queue-limit = "1000000" >> smsbox-max-pending = "100" >> sms-resend-freq = "60" >> sms-resend-retry = "-1" >> >> group = smsbox >> smsbox-id = "smsbox2" >> bearerbox-host = "127.0.0.2" >> bearerbox-port = "13101" >> sendsms-port = "13110" >> log-file = "/var/log/smsbox2.log" >> log-level = "0" >> access-log="/var/log/smsaccess2.access" >> sendsms-chars = "0123456789+ " >> #max-pending-requests = "512" >> sendsms-url="/cgi-bin/sendsms" >> #global-sender = "123456" >> #ms-length = "140" >> #http-request-retry=5 >> mo-recode='1' >> >> *Kannel3* >> group = core >> admin-port = "13200" >> admin-port-ssl="no" >> admin-password = "xxxxxxx" >> status-password = "xxxxxxx" >> admin-deny-ip="*.*.*.*" >> admin-allow-ip="*.*.*.*" >> smsbox-interface ="127.0.0.3" >> smsbox-port = "13201" >> log-file = "/var/log/kannel3.log" >> log-level = "0" >> access-log = "/var/log/access3.access" >> dlr-storage = "mysql" >> sms-incoming-queue-limit = "-1" >> sms-outgoing-queue-limit = "1000000" >> smsbox-max-pending = "100" >> sms-resend-freq = "60" >> sms-resend-retry = "-1" >> >> group = smsbox >> smsbox-id = "smsbox3" >> bearerbox-host = "127.0.0.3" >> bearerbox-port = "13201" >> sendsms-port = "13210" >> log-file = "/var/log/smsbox3.log" >> log-level = "0" >> access-log="/var/log/smsaccess3.access" >> sendsms-chars = "0123456789+ " >> #max-pending-requests = "512" >> sendsms-url="/cgi-bin/sendsms" >> #global-sender = "123456" >> #ms-length = "140" >> #http-request-retry=5 >> mo-recode='1' >> >> >> Thanks >> Ammar Ali >> >> >> >> >> >> On Wed, Apr 22, 2015 at 12:32 PM, Ammar Ali <ammarali3...@gmail.com> >> wrote: >> >>> Hello, >>> >>> When I'm configuring multiple instances of kannel on single machine with >>> different ports then I'm not getting delivery reports. But When I'm using >>> only single instance of kannel then I'm getting delivery reports. >>> >>> >>> So please suggest me. >>> >>> >>> Thanks >>> Ammar Ali >>> >>> >>> >>> >>> On Tue, Apr 21, 2015 at 7:24 PM, Ammar Ali <ammarali3...@gmail.com> >>> wrote: >>> >>>> Hello, >>>> >>>> My SMPP connections are on transceiver mode, i.e. I'm just only >>>> configure port. >>>> >>>> I'm getting delivery reports partially. I;m getting some reports. >>>> >>>> >>>> Thanks >>>> Ammar Ali >>>> >>>> >>>> >>>> >>>> >>>> >>> >> >
