Miroslav Lachman napsal/wrote, On 12/27/07 22:11:
> No ja zrovna pred par dny instaloval FreeBSD 7 na nejaky Intel
> (desktopovy board) a to melo snad ICH9 a system na nem nenasel disky v
> rezimu AHCI, pouze v rezimu IDE kompatibility.
To me trochu prekvapuje, protoze moje "masina na hrani" ma sobe
6.3-PRERELEASE a disky nasla - pokud se to da soudit z toho, ze z ni
zrovna pisu:
-----------------------------------
[EMAIL PROTECTED]:31:2:
class=0x010601 card=0x73451462 chip=0x29228086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) 6 port SATA AHCI Controller'
class = mass storage
port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,
0x9800-0x9803,0x9480-0x949f
mem 0xf9fff000-0xf9fff7ff
irq 19 at device 31.2 on pci0
AHCI Version 01.20 controller with 6 ports detected
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
ata6: <ATA channel 2> on atapci1
ata7: <ATA channel 3> on atapci1
ata8: <ATA channel 4> on atapci1
ata9: <ATA channel 5> on atapci1
ad12: 239372MB <WDC WD2500YS-01SHB0 20.06C03> at ata6-master SATA300
Trying to mount root from ufs:/dev/ad12s2a
-----------------------------------
Ale ICH9 existuji v nekolika modifikacich - takze by vysvetlenim mohlo
byt to, ze mas nejaky jiny, nepodporovany. Varianta, ze by tu byl nejaky
radic podporovany v 6.3 ale nepodporovany v 7.0 mi nepripada pravdepodobna.
Dan
--
Dan Lukes SISAL MFF UK
AKA: dan at obluda.cz, dan at freebsd.cz, dan at (kolej.)mff.cuni.cz
--
FreeBSD mailing list (users-l@freebsd.cz)
http://www.freebsd.cz/listserv/listinfo/users-l
