If you feel it is definitely necessary to see these options, could you tell me more about how to see these options?
Thanks, Tom On Fri, Nov 10, 2017 at 11:18 AM, Tom Luo <mario...@gmail.com> wrote: > Hi, Maxim, > > I don't know how to find the options you ask. > I do see this error in Dev Console. > POST https://www.englishschoolteacher.com:8443/open/1 > net::ERR_CONNECTION_REFUSED > > I am pretty sure this is https issue due to some settings. The camera > tries to connect via http instead of https. > Do you know how to solve this issue? > > Thanks, > > Tom > > > On Thu, Nov 9, 2017 at 9:31 PM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > >> It seems Flash trying to talk RTMPTS with RTMPS service >> Could you share these options >> >> 1. fallback: "rtmpt://localhost:5080/openmeetings/11" >> 2. mode: "broadcast" >> 3. native:"false" >> 4. rtmpPort: "1935" >> 5. rtmpsPort:"8443" >> 6. secure:"false" >> 7. >> >> Available in DEV console during appInit() call >> >> >> On Fri, Nov 10, 2017 at 12:23 AM, Tom Luo <mario...@gmail.com> wrote: >> >>> Hi, Maxim, >>> >>> I turned on the debug mode and I did see error messages in the Chrome >>> debug console. >>> But I don't know how to fix the problems. Do you know how? Please see >>> the messages below. >>> >>> ["onselect WxH :: 120x90"] >>> VM497:1 ["resize:: 120x90"] >>> VM498:1 ["Camera selected:: 0"] >>> VM499:1 ["Entering getCam ..."] >>> VM500:1 ["IS NO INTERVIEW "] >>> VM501:1 ["... getCam DONE [object Camera]"] >>> VM502:1 (2) ["Camera selected:: [object Camera]", false] >>> VM504:1 ["Entering getCam ..."] >>> VM505:1 ["IS NO INTERVIEW "] >>> VM506:1 ["... getCam DONE [object Camera]"] >>> VM507:1 ["_attachCamera():: muted ? false"] >>> VM508:1 ["_attachCamera()::done"] >>> :8443/open/1:1 POST https://www.ideastoproduct.net:8443/open/1 >>> net::ERR_EMPTY_RESPONSE >>> VM512:1 ["ConnectionStatus: NetConnection.Connect.Failed"] >>> VM517:1 (2) ["setRightsCallback", Array(1)] >>> VM518:1 (3) ["_updateExclusive", Array(1), Array(3)] >>> VM705:1 (2) ["appInit()", {…}] >>> VM706:1 ["resize:: 300x200"] >>> VM707:1 (2) ["NetConnection is not connected", "rtmps:// >>> www.ideastoproduct.net:8443/openmeetings/2"] >>> :8443/open/1:1 POST https://www.ideastoproduct.net:8443/open/1 >>> net::ERR_EMPTY_RESPONSE >>> VM798:1 ["ConnectionStatus: NetConnection.Connect.Failed"] >>> >>> On Thu, Nov 9, 2017 at 10:30 AM, Maxim Solodovnik <solomax...@gmail.com> >>> wrote: >>> >>>> You can try to turn-on client debugging and check browser console ... >>>> >>>> On Thu, Nov 9, 2017 at 10:29 PM, Maxim Solodovnik <solomax...@gmail.com >>>> > wrote: >>>> >>>>> Massages from openmeetings.log are just DEBUG messages, nothing to >>>>> worry about >>>>> Have you saved the Camera/Mic settings in Settings dialog? >>>>> >>>>> I don't know what can be wrong since everything works on demo ... >>>>> >>>>> On Thu, Nov 9, 2017 at 9:06 PM, Tom Luo <mario...@gmail.com> wrote: >>>>> >>>>>> Adobe Flash in Firefox somethings will crash in the step. >>>>>> >>>>>> On Thu, Nov 9, 2017 at 8:35 AM, Tom Luo <mario...@gmail.com> wrote: >>>>>> >>>>>>> In the choose device window, it will ask for camera permission. >>>>>>> >>>>>>> On Thu, Nov 9, 2017 at 8:33 AM, Tom Luo <mario...@gmail.com> wrote: >>>>>>> >>>>>>>> In the demo website, after I enter a public room, the browser will >>>>>>>> ask for the camera permission, however, in my website, the browser >>>>>>>> does not >>>>>>>> ask. >>>>>>>> This means the browser does not want to use camera. I don't know >>>>>>>> why. >>>>>>>> >>>>>>>> On Thu, Nov 9, 2017 at 8:24 AM, Tom Luo <mario...@gmail.com> wrote: >>>>>>>> >>>>>>>>> I checked my openmeetings.log. >>>>>>>>> I do see an error message: >>>>>>>>> DEBUG 11-09 08:16:21.272 o.a.o.c.r.ScopeApplicationAdapter:767 >>>>>>>>> [Thread-57] - [MessageSender] -> 'Unable to send message to NULL >>>>>>>>> scope' >>>>>>>>> clientUpdated, null >>>>>>>>> DEBUG 11-09 08:16:21.297 o.a.o.d.d.r.PollDao:103 [0.0-5443-exec-3] >>>>>>>>> - :: hasPoll :: 4 >>>>>>>>> DEBUG 11-09 08:16:21.300 o.a.o.d.d.r.PollDao:97 [0.0-5443-exec-3] >>>>>>>>> - :: getArchived :: 4 >>>>>>>>> DEBUG 11-09 08:16:32.706 o.a.o.w.c.MainPanel:117 [0.0-5443-exec-9] >>>>>>>>> - Sending WebSocket PING >>>>>>>>> DEBUG 11-09 08:16:39.925 o.a.o.w.a.Application:619 >>>>>>>>> [0.0-5443-exec-8] - Removing online room client: >>>>>>>>> 8ad9cbcb-7ebc-4822-a8fb-c590c152448d, room: 4 >>>>>>>>> DEBUG 11-09 08:16:39.932 o.a.o.c.r.ScopeApplicationAdapter:767 >>>>>>>>> [Thread-58] - [MessageSender] -> 'Unable to send message to NULL >>>>>>>>> scope' >>>>>>>>> stopStream, java.lang.Object@4fa3b9c5 >>>>>>>>> >>>>>>>>> >>>>>>>>> Is this related to my problem? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, Nov 9, 2017 at 8:12 AM, Tom Luo <mario...@gmail.com> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Hi, Maxim, >>>>>>>>>> >>>>>>>>>> I also thought I just need to set the Camera/Microphone once and >>>>>>>>>> it will automatically start. This is the case in OM3.3. >>>>>>>>>> However, in OM4.0, this does not work. I can see the video in the >>>>>>>>>> settings, but I cannot see the video after that. >>>>>>>>>> Please see the attached image. I really don't know why. It is so >>>>>>>>>> strange. The port issue is solved. >>>>>>>>>> So, I know the port does not cause this problem. >>>>>>>>>> Do you know why? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> >>>>>>>>>> Tom >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Thu, Nov 9, 2017 at 2:54 AM, Maxim Solodovnik < >>>>>>>>>> solomax...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Hello Tom, >>>>>>>>>>> >>>>>>>>>>> I'm answering emails as soon as I got free time, you shouldn't >>>>>>>>>>> expect immediate answer :)) >>>>>>>>>>> >>>>>>>>>>> Camera/Microphone will be started automatically as soon as you >>>>>>>>>>> will set it up once >>>>>>>>>>> So open the settings, choose correct devises, press Save >>>>>>>>>>> >>>>>>>>>>> According to port availability you need to check detailed >>>>>>>>>>> results: push small "Copy" button on the right, Paste result to >>>>>>>>>>> some text >>>>>>>>>>> file and check what is wrong >>>>>>>>>>> >>>>>>>>>>> On Thu, Nov 9, 2017 at 2:40 AM, Tom Luo <mario...@gmail.com> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Another issue is that when I do port testing using the tool on >>>>>>>>>>>> the login page. The port testing always fails even thought I >>>>>>>>>>>> opened all >>>>>>>>>>>> ports in my server. >>>>>>>>>>>> Do you know why? Is this issue related to the camera issue? >>>>>>>>>>>> >>>>>>>>>>>> Thanks, >>>>>>>>>>>> >>>>>>>>>>>> Tom >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Wed, Nov 8, 2017 at 2:38 PM, Tom Luo <mario...@gmail.com> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Right now, I can see my video if I click "choose device". >>>>>>>>>>>>> However, I still cannot see the video in my camera in the public >>>>>>>>>>>>> conference. >>>>>>>>>>>>> >>>>>>>>>>>>> The demo website does not have this problem. So, I know it >>>>>>>>>>>>> must be some settings in my side. >>>>>>>>>>>>> Any idea how to solve this issue? >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks, >>>>>>>>>>>>> >>>>>>>>>>>>> Tom >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Wed, Nov 8, 2017 at 1:12 PM, Tom Luo <mario...@gmail.com> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Ok. I fixed the problem. Now I can connect using https. I >>>>>>>>>>>>>> will explain to you how I fixed the problem later. >>>>>>>>>>>>>> However, after I enter a public room, it seems my camera is >>>>>>>>>>>>>> not working. >>>>>>>>>>>>>> I remember in OM3.3. The camera automatically starts. Is >>>>>>>>>>>>>> there a button I need to press in OM4.0 to start my camera? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Tom >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 12:45 PM, Maxim Solodovnik < >>>>>>>>>>>>>> solomax...@gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm referring these instructions: http://openmeeti >>>>>>>>>>>>>>> ngs.apache.org/RTMPSAndHTTPS.html >>>>>>>>>>>>>>> Unfortunately I have no time to check everything .... >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thu, Nov 9, 2017 at 12:29 AM, Tom Luo <mario...@gmail.com >>>>>>>>>>>>>>> > wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Now there are some logs in red5.log >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2017-11-08 17:26:39,998 [NioProcessor-11] INFO >>>>>>>>>>>>>>>> o.r.s.net.rtmp.RTMPMinaConnection - Connection is closed: >>>>>>>>>>>>>>>> WNZC8FWV7N3VL >>>>>>>>>>>>>>>> 2017-11-08 17:26:39,998 [NioProcessor-11] WARN >>>>>>>>>>>>>>>> o.r.s.net.rtmp.RTMPMinaIoHandler - Connection was not >>>>>>>>>>>>>>>> found for WNZC8FWV7N3VL >>>>>>>>>>>>>>>> 2017-11-08 17:26:40,007 [RTMPConnectionScheduler-5] WARN >>>>>>>>>>>>>>>> o.r.server.net.rtmp.RTMPConnection - Closing >>>>>>>>>>>>>>>> O4WODAWEPAMAT, due to long handshake. State: connect >>>>>>>>>>>>>>>> 2017-11-08 17:26:40,007 [NioProcessor-12] INFO >>>>>>>>>>>>>>>> o.r.s.net.rtmp.RTMPMinaConnection - Connection is closed: >>>>>>>>>>>>>>>> O4WODAWEPAMAT >>>>>>>>>>>>>>>> 2017-11-08 17:26:40,007 [NioProcessor-12] WARN >>>>>>>>>>>>>>>> o.r.s.net.rtmp.RTMPMinaIoHandler - Connection was not >>>>>>>>>>>>>>>> found for O4WODAWEPAMAT >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 12:22 PM, Tom Luo < >>>>>>>>>>>>>>>> mario...@gmail.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> http://openmeetings.markmail.o >>>>>>>>>>>>>>>>> rg/message/j4gx2q6woidyqj7l?q=letsencrypt >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> This is the instruction I followed. I performed step 1-8. >>>>>>>>>>>>>>>>> Just skipped step 7 as you said. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I don't feel I miss any step. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 12:20 PM, Maxim Solodovnik < >>>>>>>>>>>>>>>>> solomax...@gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Unfortunately not >>>>>>>>>>>>>>>>>> Maybe you miss some steps from the instructions? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thu, Nov 9, 2017 at 12:17 AM, Tom Luo < >>>>>>>>>>>>>>>>>> mario...@gmail.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Yes. I did SSL for the web interface and Set up Native >>>>>>>>>>>>>>>>>>> RTMPS. >>>>>>>>>>>>>>>>>>> It still does not work. Nothing is listening at port >>>>>>>>>>>>>>>>>>> 5443. >>>>>>>>>>>>>>>>>>> Do you have any other ideas why? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Tom >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 11:30 AM, Maxim Solodovnik < >>>>>>>>>>>>>>>>>>> solomax...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Have you performed these: http://openmeetings.apa >>>>>>>>>>>>>>>>>>>> che.org/RTMPSAndHTTPS.html#SSL_for_the_web_interface >>>>>>>>>>>>>>>>>>>> steps? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 11:14 PM, Tom Luo < >>>>>>>>>>>>>>>>>>>> mario...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I cleared my old log and restarted the red5. >>>>>>>>>>>>>>>>>>>>> Here is my red5.log: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2017-11-08 11:04:47,270 [main] INFO >>>>>>>>>>>>>>>>>>>>> org.red5.server.Launcher - Red5 Server 1.0.10 ( >>>>>>>>>>>>>>>>>>>>> https://github.com/Red5) >>>>>>>>>>>>>>>>>>>>> 2017-11-08 11:04:47,338 [main] INFO >>>>>>>>>>>>>>>>>>>>> o.s.c.s.FileSystemXmlApplicationContext - Refreshing >>>>>>>>>>>>>>>>>>>>> org.springframework.context.su >>>>>>>>>>>>>>>>>>>>> pport.FileSystemXmlApplicationContext@5f2050f6: >>>>>>>>>>>>>>>>>>>>> startup date [Wed Nov 08 11:04:47 EST 2017]; root of >>>>>>>>>>>>>>>>>>>>> context hierarchy >>>>>>>>>>>>>>>>>>>>> 2017-11-08 11:04:47,393 [main] INFO >>>>>>>>>>>>>>>>>>>>> o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML >>>>>>>>>>>>>>>>>>>>> bean definitions from class path resource [red5.xml] >>>>>>>>>>>>>>>>>>>>> 2017-11-08 11:04:47,572 [main] INFO >>>>>>>>>>>>>>>>>>>>> o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML >>>>>>>>>>>>>>>>>>>>> bean definitions from class path resource >>>>>>>>>>>>>>>>>>>>> [jee-container.xml] >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Right now, I can still use http at port 5080 to access >>>>>>>>>>>>>>>>>>>>> OM4.0; however https still does not work. >>>>>>>>>>>>>>>>>>>>> Do I need to check other places? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Tom >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 10:55 AM, Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>> solomax...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> please check red5.log. >>>>>>>>>>>>>>>>>>>>>> Red5 reports what ports it is listening >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Ports are configured in red5.properties >>>>>>>>>>>>>>>>>>>>>> HTTP vs HTTPS is being configured in jee*.xml >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> All other configuration values are in Admin->Config >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 10:53 PM, Tom Luo < >>>>>>>>>>>>>>>>>>>>>> mario...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Is there a similar configuration file like >>>>>>>>>>>>>>>>>>>>>>> webapps/openmeetings/public/config.xml in OM4.0? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Tom >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 10:52 AM, Tom Luo < >>>>>>>>>>>>>>>>>>>>>>> mario...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi, Maxim, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I checked the more up-to-date instructions you >>>>>>>>>>>>>>>>>>>>>>>> sent. It still lists step 7: >>>>>>>>>>>>>>>>>>>>>>>> webapps/openmeetings/public/config.xml| >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I understand you said this step is not necessary. >>>>>>>>>>>>>>>>>>>>>>>> However, I tried to access mydoamin:5443/openmeetings. >>>>>>>>>>>>>>>>>>>>>>>> I just see an inaccessible error. More important, I >>>>>>>>>>>>>>>>>>>>>>>> tried sudo netstat -plnt, but nothing is listening at >>>>>>>>>>>>>>>>>>>>>>>> port 5443. >>>>>>>>>>>>>>>>>>>>>>>> Of course, I started the red5 server. Do you know >>>>>>>>>>>>>>>>>>>>>>>> why? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Tom >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 1:52 AM, Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>>> solomax...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> This is email from 2016 >>>>>>>>>>>>>>>>>>>>>>>>> It is not necessary to modify config.xml anymore >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> These parameters are redundant since 4.0.0 >>>>>>>>>>>>>>>>>>>>>>>>> <protocol>https</protocol> <red5httpport>5443</ >>>>>>>>>>>>>>>>>>>>>>>>> red5httpport> <rtmpsslport>5443</rtmpsslport> >>>>>>>>>>>>>>>>>>>>>>>>> These can be set via Admin->Config >>>>>>>>>>>>>>>>>>>>>>>>> <useSSL>yes</useSSL> <proxyType>none</proxyType> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Here is the thread with more up-to-date >>>>>>>>>>>>>>>>>>>>>>>>> instructions: http://markmail. >>>>>>>>>>>>>>>>>>>>>>>>> org/message/ik4qdhdychl364bp (I haven't check >>>>>>>>>>>>>>>>>>>>>>>>> them ... ) >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Nov 8, 2017 at 1:33 PM, Tom Luo < >>>>>>>>>>>>>>>>>>>>>>>>> mario...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hi, all, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> In the email: >>>>>>>>>>>>>>>>>>>>>>>>>> http://openmeetings.markmail.o >>>>>>>>>>>>>>>>>>>>>>>>>> rg/message/hqwjnihcfb4tqxkx?q=letsencrypt >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> It said we need to modify >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Edit ../webapps/openmeetings/public/config.xml >>>>>>>>>>>>>>>>>>>>>>>>>> and set >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> <protocol>https</protocol> >>>>>>>>>>>>>>>>>>>>>>>>>> <red5httpport>5443</red5httpport> >>>>>>>>>>>>>>>>>>>>>>>>>> <rtmpsslport>5443</rtmpsslport> >>>>>>>>>>>>>>>>>>>>>>>>>> <useSSL>yes</useSSL> <proxyType>none</proxyType> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> However, in OM4.0, I cannot find the config.xml >>>>>>>>>>>>>>>>>>>>>>>>>> file. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> So, which file should I modify? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Tom >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> WBR >>>>>>>>>>> Maxim aka solomax >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> WBR >>>>> Maxim aka solomax >>>>> >>>> >>>> >>>> >>>> -- >>>> WBR >>>> Maxim aka solomax >>>> >>> >>> >> >> >> -- >> WBR >> Maxim aka solomax >> > >
