From: Stephen Warren <swar...@nvidia.com>
Seaboard and Ventana are very similar boards, and so share the seaboard.c
board file. The one difference needed so far is detected at run-time by
calling machine_is_ventana(). This bloats the Ventana build with code
that is never used. Switch to detecting Ventana at compile time to remove
bloat. This shaves ~5K off the SPL size on Ventana, and makes the SPL fit
within the max size.
Signed-off-by: Stephen Warren <swar...@nvidia.com>
---
v3: Combined back-to-back #ifdefs.
v2: New patch to replace modification of CONFIG_SYS_TEXT_BASE.
---
board/nvidia/seaboard/seaboard.c | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 4e8a183..ea431e9 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -34,7 +34,7 @@
#endif
/* TODO: Remove this code when the SPI switch is working */
-#ifndef CONFIG_SPI_UART_SWITCH
+#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
/*
* Routine: gpio_config_uart_seaboard
* Description: Force GPIO_PI3 low on Seaboard so UART4 works.
@@ -48,8 +48,6 @@ static void gpio_config_uart_seaboard(void)
void gpio_early_init_uart(void)
{
- if (machine_is_ventana())
- return;
gpio_config_uart_seaboard();
}
#endif
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
