From: Stephen Warren <swar...@nvidia.com>
Seaboard and Ventana are very similar boards, and so share the seaboard.c
board file. The one difference needed so far is detected at run-time by
calling machine_is_ventana(). This bloats the Ventana build with code
that is never used. Switch to detecting Ventana at compile time to remove
bloat. This shaves ~5K off the SPL size on Ventana, and makes the SPL fit
within the max size.
Signed-off-by: Stephen Warren <swar...@nvidia.com>
---
v2: New patch to replace modification of CONFIG_SYS_TEXT_BASE.
---
board/nvidia/seaboard/seaboard.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 4e8a183..6dce57f 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -35,6 +35,7 @@
/* TODO: Remove this code when the SPI switch is working */
#ifndef CONFIG_SPI_UART_SWITCH
+#if CONFIG_MACH_TYPE != MACH_TYPE_VENTANA
/*
* Routine: gpio_config_uart_seaboard
* Description: Force GPIO_PI3 low on Seaboard so UART4 works.
@@ -48,11 +49,10 @@ static void gpio_config_uart_seaboard(void)
void gpio_early_init_uart(void)
{
- if (machine_is_ventana())
- return;
gpio_config_uart_seaboard();
}
#endif
+#endif
#ifdef CONFIG_TEGRA_MMC
/*
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
