On 10/8/2012 6:38 AM, Stefano Babic wrote:
On 04/10/2012 03:47, Troy Kisky wrote:
The '#' used as comments in the files cause the preprocessor
trouble, so change to /* */.
Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
---
Hi Troy,
Makefile | 3 +-
board/esg/ima3-mx53/imximage.cfg | 120 ++++++-----
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 90 ++++----
board/freescale/mx25pdk/imximage.cfg | 77 +++----
board/freescale/mx51evk/imximage.cfg | 114 +++++-----
board/freescale/mx53ard/imximage_dd3.cfg | 83 ++++----
board/freescale/mx53evk/imximage.cfg | 86 ++++----
board/freescale/mx53loco/imximage.cfg | 83 ++++----
board/freescale/mx53smd/imximage.cfg | 83 ++++----
board/freescale/mx6qarm2/imximage.cfg | 88 ++++----
board/genesi/mx51_efikamx/imximage_mx.cfg | 132 ++++++------
board/genesi/mx51_efikamx/imximage_sb.cfg | 126 +++++------
board/ttcontrol/vision2/imximage_hynix.cfg | 295 ++++++++++++++------------
13 files changed, 727 insertions(+), 653 deletions(-)
I see the C preprocessor as an optional feature, instead of a rule
everybody must follow.
diff --git a/Makefile b/Makefile
index a40d4cc..64ff1b8 100644
--- a/Makefile
+++ b/Makefile
@@ -431,7 +431,8 @@ $(obj)u-boot.img: $(obj)u-boot.bin
-d $< $@
$(obj)u-boot.imx: $(obj)u-boot.bin
- $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \
+ $(CC) -E -x c $(CONFIG_IMX_CONFIG) -I./include -o
$(obj)imxcfg.imx
+ $(obj)tools/mkimage -n $(obj)imxcfg.imx -T imximage \
-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
In fact, adding this rule here requires that each board configuration
must be changed. And for all of them, running the preprocessor is
unnnecessary.
What about to add this rule only to the Makefile of the boards that
require preprocessing ?
Best regards,
Stefano Babic
That would be great. But I don't know how to accomplish that. Can you
point to similar magic that
I can try to understand?
Thanks
Troy
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
