Dear Łukasz Dałek, > On 23.09.2012 23:31, Marek Vasut wrote: > > Dear Łukasz Dałek, > > > >> On 23.09.2012 23:04, Marek Vasut wrote: > >>> PXA2xx is OHCI host with one OTG port. > >>> > >> From pxa255 documentation: > >> "The UDC supports 16 endpoints and can operate half-duplex at a rate of > >> 12 Mbps (as a slave only, > >> not as a host or hub controller)." > >> > >>> what about include/usb/pxa27x_udc.h ... btw can't pxa27x and pxa25x UDC > >>> use the same driver? > >> > >> pxa27x_udc driver is using older layer which doesn't work with usb > >> ethernet driver. > >> > >> Btw. pxa27x can be host, pxa25x can't. > > > > Can you update the new gadget driver to be compatible with pxa27x then ? > > I don't have any board with pxa27x processor. And I'm quite sure that > differences between pxa25x and pxa27x usb are too big. Even in > Linux kernel are two separate drivers for 25x and 27x chips.
Isn't the 25x only a subset of the 27x ? > Łukasz Dałek Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
