From: Fabio Estevam <fabio.este...@freescale.com> According to include/i2c.h:
"/* * Many boards/controllers/drivers don't support an I2C slave interface so * provide a default slave address for them for use in common code. A real * value for CONFIG_SYS_I2C_SLAVE should be defined for any board which does * support a slave interface. */ #ifndef CONFIG_SYS_I2C_SLAVE #define CONFIG_SYS_I2C_SLAVE 0xfe #endif " As the mxc_i2c driver does not support slave mode, there is no need to define CONFIG_SYS_I2C_SLAVE in i.MX board file. Cc: Jason Liu <r64...@freescale.com> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> --- include/configs/mx53evk.h | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index a77e5b2..2acefe9 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -55,7 +55,6 @@ #define CONFIG_I2C_MXC #define CONFIG_SYS_I2C_MX53_PORT2 1 #define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0xfe /* PMIC Configs */ #define CONFIG_PMIC -- 1.7.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
