From: Fabio Estevam <fabio.este...@freescale.com> According to include/i2c.h:
"/* * Many boards/controllers/drivers don't support an I2C slave interface so * provide a default slave address for them for use in common code. A real * value for CONFIG_SYS_I2C_SLAVE should be defined for any board which does * support a slave interface. */ #ifndef CONFIG_SYS_I2C_SLAVE #define CONFIG_SYS_I2C_SLAVE 0xfe #endif " As the mxc_i2c driver does not support slave mode, there is no need to define CONFIG_SYS_I2C_SLAVE in i.MX board file. Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> --- include/configs/imx31_phycore.h | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 3153eb5..b3244b9 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -56,7 +56,6 @@ #define CONFIG_I2C_MXC #define CONFIG_SYS_I2C_MX31_PORT2 #define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0xfe #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -- 1.7.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
