>-----Original Message-----
>From: Fabio Estevam [mailto:feste...@gmail.com]
>Sent: Tuesday, May 08, 2012 4:26 AM
>To: u-boot@lists.denx.de
>Cc: sba...@denx.de; Liu Hui-R64343; Estevam Fabio-R49496
>Subject: [PATCH 2/4] mx53loco: Add mc34708 support and set mx53
>frequency at 1GHz
>
>From: Fabio Estevam <fabio.este...@freescale.com>
>
>Add mc34708 support and set mx53 core frequency at its maximum value of
>1GHz.
>
>Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
Acked-by: Jason Liu <r64...@freescale.com>
>---
> board/freescale/mx53loco/mx53loco.c | 52 +++++++++++++++++++++++++---
>------
> include/configs/mx53loco.h | 2 +
> include/fsl_pmic.h | 10 +++++++
> 3 files changed, 50 insertions(+), 14 deletions(-)
>
>diff --git a/board/freescale/mx53loco/mx53loco.c
>b/board/freescale/mx53loco/mx53loco.c
>index 7ed5c4e..8c18b99 100644
>--- a/board/freescale/mx53loco/mx53loco.c
>+++ b/board/freescale/mx53loco/mx53loco.c
>@@ -38,6 +38,7 @@
> #include <asm/gpio.h>
> #include <pmic.h>
> #include <dialog_pmic.h>
>+#include <fsl_pmic.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
>@@ -319,23 +320,46 @@ static void setup_iomux_i2c(void)
>
> static int power_init(void)
> {
>- unsigned int val, ret;
>+ unsigned int val;
>+ int ret = -1;
> struct pmic *p;
>
>- pmic_dialog_init();
>- p = get_pmic();
>-
>- /* Set VDDA to 1.25V */
>- val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
>- ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
>-
>- ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val);
>- val |= DA9052_SUPPLY_VBCOREGO;
>- ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val);
>+ if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
>+ pmic_dialog_init();
>+ p = get_pmic();
>+
>+ /* Set VDDA to 1.25V */
>+ val = DA9052_BUCKCORE_BCOREEN |
>DA_BUCKCORE_VBCORE_1_250V;
>+ ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
>+
>+ ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val);
>+ val |= DA9052_SUPPLY_VBCOREGO;
>+ ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val);
>+
>+ /* Set Vcc peripheral to 1.30V */
>+ ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
>+ ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
>+ }
>
>- /* Set Vcc peripheral to 1.35V */
>- ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
>- ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
>+ if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
>+ pmic_init();
>+ p = get_pmic();
>+
>+ /* Set VDDGP to 1.25V for 1GHz on SW1 */
>+ pmic_reg_read(p, REG_SW_0, &val);
>+ val = (val & ~SWx_VOLT_MASK_MC34708) |
>SWx_1_250V_MC34708;
>+ ret = pmic_reg_write(p, REG_SW_0, val);
>+
>+ /* Set VCC as 1.30V on SW2 */
>+ pmic_reg_read(p, REG_SW_1, &val);
>+ val = (val & ~SWx_VOLT_MASK_MC34708) |
>SWx_1_300V_MC34708;
>+ ret |= pmic_reg_write(p, REG_SW_1, val);
>+
>+ /* Set global reset timer to 4s */
>+ pmic_reg_read(p, REG_POWER_CTL2, &val);
>+ val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708;
>+ ret |= pmic_reg_write(p, REG_POWER_CTL2, val);
>+ }
>
> return ret;
> }
>diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index
>8f43eec..87f6ed1 100644
>--- a/include/configs/mx53loco.h
>+++ b/include/configs/mx53loco.h
>@@ -97,7 +97,9 @@
> #define CONFIG_PMIC
> #define CONFIG_PMIC_I2C
> #define CONFIG_DIALOG_PMIC
>+#define CONFIG_PMIC_FSL
> #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
>+#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
>
> /* allow to overwrite serial and ethaddr */ #define
>CONFIG_ENV_OVERWRITE diff --git a/include/fsl_pmic.h b/include/fsl_pmic.h
>index 742f2e1..3b7cd37 100644
>--- a/include/fsl_pmic.h
>+++ b/include/fsl_pmic.h
>@@ -122,4 +122,14 @@ enum {
> /* Interrupt status 1 */
> #define RTCRSTI (1 << 7)
>
>+/* MC34708 Definitions */
>+#define SWx_VOLT_MASK_MC34708 0x3F
>+#define SWx_1_250V_MC34708 0x30
>+#define SWx_1_300V_MC34708 0x34
>+#define TIMER_MASK_MC34708 0x300
>+#define TIMER_4S_MC34708 0x100
>+#define VUSBSEL_MC34708 (1 << 2)
>+#define VUSBEN_MC34708 (1 << 3)
>+#define SWBST_CTRL 31
>+
> #endif
>--
>1.7.1
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
