From: Fabio Estevam <fabio.este...@freescale.com>
FSL 2.6.35 kernel assumes that the bootloader passes the CONFIG_REVISION_TAG
information.
The kernel uses this data to distinguish between Dialog versus mc34708 based
boards,
and also to distinguish between revA and revB of the mc34708 based boards.
Suggested-by: Yu Li <y...@magniel.com>
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
board/freescale/mx53loco/mx53loco.c | 7 +++++++
include/configs/mx53loco.h | 1 +
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx53loco/mx53loco.c
b/board/freescale/mx53loco/mx53loco.c
index 4d3b73d..2f2c00c 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -62,6 +62,13 @@ void dram_init_banksize(void)
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
+u32 get_board_rev(void)
+{
+ /* TODO: Convert the register to proper io accessor */
+ int rev = readl(IIM_BASE_ADDR + 0x878);
+ return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
+}
+
static void setup_iomux_uart(void)
{
/* UART1 RXD */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 87f6ed1..eab0e27 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -43,6 +43,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
+#define CONFIG_REVISION_TAG
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
