Pass memory size from SPL via structure located in SRAM instead of SCRATCH
registers. This allows passing more data about boot from SPL to U-Boot, like the
boot mode pads configuration.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Detlev Zundel <d...@denx.de>
Cc: Fabio Estevam <fabio.este...@freescale.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Wolfgang Denk <w...@denx.de>
---
arch/arm/cpu/arm926ejs/mx28/mx28.c | 16 +++++-----------
arch/arm/cpu/arm926ejs/mx28/mx28_init.h | 1 +
arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 7 +++++++
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 10 +++-------
arch/arm/include/asm/arch-mx28/sys_proto.h | 4 ++++
5 files changed, 20 insertions(+), 18 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c
b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index dc0338d..54a68e1 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -279,22 +279,16 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
int mx28_dram_init(void)
{
- struct mx28_digctl_regs *digctl_regs =
- (struct mx28_digctl_regs *)MXS_DIGCTL_BASE;
- uint32_t sz[2];
+ struct mx28_spl_data *data = (struct mx28_spl_data *)
+ ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf);
- sz[0] = readl(&digctl_regs->hw_digctl_scratch0);
- sz[1] = readl(&digctl_regs->hw_digctl_scratch1);
-
- if (sz[0] != sz[1]) {
+ if (data->mem_dram_size == 0) {
printf("MX28:\n"
- "Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n"
- "HW_DIGCTRL_SCRATCH1 is not the same. Please\n"
- "verify these two registers contain valid RAM size!\n");
+ "Error, the RAM size passed up from SPL is 0!\n");
hang();
}
- gd->ram_size = sz[0];
+ gd->ram_size = data->mem_dram_size;
return 0;
}
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28_init.h
b/arch/arm/cpu/arm926ejs/mx28/mx28_init.h
index 98d3631..8eac958 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28_init.h
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28_init.h
@@ -37,5 +37,6 @@ static inline void mx28_power_wait_pswitch(void) { }
#endif
void mx28_mem_init(void);
+uint32_t mx28_mem_get_size(void);
#endif /* __M28_INIT_H__ */
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c
b/arch/arm/cpu/arm926ejs/mx28/spl_boot.c
index dfb8309..37e1eb7 100644
--- a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/mx28/spl_boot.c
@@ -28,6 +28,7 @@
#include <asm/io.h>
#include <asm/arch/iomux-mx28.h>
#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
#include "mx28_init.h"
@@ -49,9 +50,15 @@ void early_delay(int delay)
void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
const unsigned int iomux_size)
{
+ struct mx28_spl_data *data = (struct mx28_spl_data *)
+ ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf);
+
mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size);
mx28_power_init();
+
mx28_mem_init();
+ data->mem_dram_size = mx28_mem_get_size();
+
mx28_power_wait_pswitch();
}
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
index 911bbef..4f62142 100644
--- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
@@ -173,10 +173,8 @@ void mx28_mem_setup_vddd(void)
&power_regs->hw_power_vdddctrl);
}
-void mx28_mem_get_size(void)
+uint32_t mx28_mem_get_size(void)
{
- struct mx28_digctl_regs *digctl_regs =
- (struct mx28_digctl_regs *)MXS_DIGCTL_BASE;
uint32_t sz, da;
uint32_t *vt = (uint32_t *)0x20;
/* The following is "subs pc, r14, #4", used as return from DABT. */
@@ -187,11 +185,11 @@ void mx28_mem_get_size(void)
vt[4] = data_abort_memdetect_handler;
sz = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
- writel(sz, &digctl_regs->hw_digctl_scratch0);
- writel(sz, &digctl_regs->hw_digctl_scratch1);
/* Restore the old DABT handler. */
vt[4] = da;
+
+ return sz;
}
void mx28_mem_init(void)
@@ -239,6 +237,4 @@ void mx28_mem_init(void)
early_delay(10000);
mx28_mem_setup_cpu_and_hbus();
-
- mx28_mem_get_size();
}
diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h
b/arch/arm/include/asm/arch-mx28/sys_proto.h
index 15d8de3..04f2e4d 100644
--- a/arch/arm/include/asm/arch-mx28/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx28/sys_proto.h
@@ -39,6 +39,10 @@ void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
const unsigned int iomux_size);
#endif
+struct mx28_spl_data {
+ uint32_t mem_dram_size;
+};
+
int mx28_dram_init(void);
#endif /* __MX28_H__ */
--
1.7.10
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
