On 29/04/2012 18:43, Dirk Behme wrote: > Hi Stefano, > > On 29.04.2012 16:54, Fabio Estevam wrote: >> Hi Dirk, >> >> On Thu, Apr 26, 2012 at 3:04 AM, Dirk Behme<dirk.be...@de.bosch.com> >> wrote: >> >>> We had this patch on a v2012.04.1 based test branch and it showed some >>> strange issues with SD cards on i.MX6. >>> >>> Depending on the SD card used (different ones) and the board >>> (SabreLite and >>> a custom one) >>> >>> - the SD card just works fine as we are used to >>> - booting fails with "MMC init failed" >>> - booting fails with "Card did not respond to voltage select!" >>> >>> Reverting this patch on the test branch makes all tested boards and >>> tested >>> SD cards work fine again. >>> >>> I haven't looked into the details to debug the root cause, though. >>> >>> So for the moment: NACK >> >> Thanks for testing it. I found one mistake and will submit a fix shortly. > > I saw you have this patch already in > > http://git.denx.de/?p=u-boot/u-boot-imx.git;a=shortlog;h=refs/heads/maste
Hi Dirk, thanks for raise my attention on this issue. I drop the patch from u-boot-imx Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
