Hi Stefano,
On 29.04.2012 16:54, Fabio Estevam wrote:
Hi Dirk,
On Thu, Apr 26, 2012 at 3:04 AM, Dirk Behme<dirk.be...@de.bosch.com> wrote:
We had this patch on a v2012.04.1 based test branch and it showed some
strange issues with SD cards on i.MX6.
Depending on the SD card used (different ones) and the board (SabreLite and
a custom one)
- the SD card just works fine as we are used to
- booting fails with "MMC init failed"
- booting fails with "Card did not respond to voltage select!"
Reverting this patch on the test branch makes all tested boards and tested
SD cards work fine again.
I haven't looked into the details to debug the root cause, though.
So for the moment: NACK
Thanks for testing it. I found one mistake and will submit a fix shortly.
I saw you have this patch already in
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=shortlog;h=refs/heads/master
Do you mind to remove this?
Best regards
Dirk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
