Dear Jeroen Hofstee, In message <1334870718-24065-1-git-send-email-jer...@myspectrum.nl> you wrote: > This is just a patch for the problem reported here: > http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally > reported by Igor. > > "Looks like this is copy paste error from my side,(for port2/3 it should have > been bypass > for port2/3 rather its port1 set in bypass mode)" > > I only submit the patch since it is missing in 2012.04-rc3 while the twister > board > depends on it. Maybe it is already somewhere in the reposistory, but I cannot > find it. > > note: the twister boards still needs an additional `usb reset`, don't know > why. > > U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38) > > AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz > TAM3517 TWISTER Board + LPDDR/NAND > I2C: ready > DRAM: 256 MiB > NAND: 512 MiB > MMC: OMAP SD/MMC: 0 > In: serial > Out: serial > Err: serial > Die ID #746c0000000000000155dc1405011024 > Net: DaVinci-EMAC, smc911x-0 > Hit any key to stop autoboot: 0 > twister => usb start > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > twister => usb reset > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > twister => usb reset > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > twister => usb reset > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > > > Signed-off-by: Jeroen Hofstee <jer...@myspectrum.nl> > --- > drivers/usb/host/ehci-omap.c | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-)
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Thought for the day: What if there were no hypothetical situations? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
