On Fri, Apr 20, 2012 at 2:55 AM, Jeroen Hofstee <jer...@myspectrum.nl> wrote: > This is just a patch for the problem reported here: > http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally > reported by Igor. > > "Looks like this is copy paste error from my side,(for port2/3 it should have > been bypass > for port2/3 rather its port1 set in bypass mode)" > > I only submit the patch since it is missing in 2012.04-rc3 while the twister > board > depends on it. Maybe it is already somewhere in the reposistory, but I cannot > find it. > > note: the twister boards still needs an additional `usb reset`, don't know > why. > > U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38) > > AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz > TAM3517 TWISTER Board + LPDDR/NAND > I2C: ready > DRAM: 256 MiB > NAND: 512 MiB > MMC: OMAP SD/MMC: 0 > In: serial > Out: serial > Err: serial > Die ID #746c0000000000000155dc1405011024 > Net: DaVinci-EMAC, smc911x-0 > Hit any key to stop autoboot: 0 > twister => usb start > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > twister => usb reset > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > twister => usb reset > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > twister => usb reset > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found >
Yes it was a typo and Looks like the corrected patch was not picked up as in here: http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/124620 FWIW Acked-by: Govindraj.R <govindraj.raja <at> ti.com> > > Signed-off-by: Jeroen Hofstee <jer...@myspectrum.nl> > --- > drivers/usb/host/ehci-omap.c | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c > index 00f787f..1ed7710 100644 > --- a/drivers/usb/host/ehci-omap.c > +++ b/drivers/usb/host/ehci-omap.c > @@ -200,12 +200,12 @@ int omap_ehci_hcd_init(struct omap_usbhs_board_data > *usbhs_pdata) > if (is_ehci_phy_mode(usbhs_pdata->port_mode[1])) > clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS); > else > - setbits_le32(®, > OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS); > + setbits_le32(®, > OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS); > > if (is_ehci_phy_mode(usbhs_pdata->port_mode[2])) > clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS); > else > - setbits_le32(®, > OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS); > + setbits_le32(®, > OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS); > } else if (rev == OMAP_USBHS_REV2) { > clrsetbits_le32(®, (OMAP_P1_MODE_CLEAR | > OMAP_P2_MODE_CLEAR), > OMAP4_UHH_HOSTCONFIG_APP_START_CLK); > -- > 1.7.5.4 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
