On 20/04/2012 00:42, Tom Rini wrote: > On Thu, Apr 19, 2012 at 11:25:18PM +0200, Jeroen Hofstee wrote: >> This is just a patch for the problem reported here: >> http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally >> reported by Igor. >> >> "Looks like this is copy paste error from my side,(for port2/3 it should >> have been bypass >> for port2/3 rather its port1 set in bypass mode)" >> >> I only submit the patch since it is missing in 2012.04-rc3 while the twister >> board >> depends on it. Maybe it is already somewhere in the reposistory, but I >> cannot find it. >> >> note: the twister boards still needs an additional `usb reset`, don't know >> why. > > > I don't see any difference between the first usb start and the following > resets, should there have been? Clearly, there's a problem, but lets > see if we can fix all of it in time.. Thanks!
The issue was raised during the review of Govindraj's patch, it seems the wrong version was picked up. Acked-by : Stefano Babic <sba...@denx.de> Can you apply it for the release (this is clearly a fix) ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
