On 11.04.2012 22:22, Fabio Estevam wrote:
There is a 'gpio_direction_output(87, 0);' call previously, so the GPIO direction is already established.Use gpio_set_value() for changing the GPIO output then. Signed-off-by: Fabio Estevam<fabio.este...@freescale.com> --- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 1d09a72..2155d87 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -135,7 +135,7 @@ static void setup_iomux_enet(void) /* Need delay 10ms according to KSZ9021 spec */ udelay(1000 * 10); - gpio_direction_output(87, 1); /* GPIO 3-23 */ + gpio_set_value(87, 1); /* GPIO 3-23 */ imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); }
Acked-by: Dirk Behme <dirk.be...@googlemail.com> Thanks Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
