> -----Original Message----- > From: Valentin Longchamp [mailto:valentin.longch...@keymile.com] > Sent: 27 March 2012 19:02 > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de > Subject: Re: [PATCH v2 00/19] updates for keymile arm boards > > Prafulla, > > On 03/26/2012 01:34 PM, Valentin Longchamp wrote: > > This patch series updates keymile boards with Kirkwood CPU and adds > > two new boards. This new boards are kmnusa and kmcoge5un. Also the > > existing boards with own config files were migrated to the common > > header km_kirkwood.h. Some small adaption in generic kirkwood code > > was needed due to two new features on the new board. First one is > > that the u-boot environment is in the SPI NOR flash and the second > one > > is the direct MAC/MAC connection from the mvgbe interface to an > > simple switch. > > > > Changes for v2: > > - removed the two patches "spi/kirkwood: add weak functions > > board_spi_bus_claim/release" and "mvgbe: remove warning for > > unused methods" from the series as they are were independent from > > it. The series is however dependent of these two patches. > > > > Holger Brunck (13): > > arm/km: add board type to boards.cfg > > arm/km: add piggy mac adress offset for mgcoge3un > > arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE > > arm/km: use ARRAY_SIZE macro > > arm/km: fix wrong comment in SDRAM config for mgcoge3un > > arm/km: change maintainer for mgcoge3un > > arm/km: remove CONFIG_RESET_PHY_R > > km/arm: remove spi toggle command > > arm/km: add kmnusa board support > > arm/km: add kmcoge5un board support > > arm/km: convert mgcoge3un target to km_kirkwood > > arm/km: remove portl2.h and use km_kirkwood instead > > arm/km: cleanup km_kirkwood boards > > > > Valentin Longchamp (6): > > arm/km: enable mii cmd > > arm/km: use correct kw_gpio function for NAND/SPI switching > > arm/km: implement weak function board_spi_clam_bus/release > > arm/kirkwood: protect the ENV_SPI #defines > > arm/km: correct init of 88e6352 switch in the reset_phy function > > arm/km: enable BOCO2 FPGA download support > > > > MAINTAINERS | 4 +- > > arch/arm/include/asm/arch-kirkwood/config.h | 12 +- > > board/keymile/common/common.h | 12 + > > board/keymile/km_arm/128M16-1.cfg | 290 > ++++++++++++++++++++++++++ > > board/keymile/km_arm/256M8-1.cfg | 292 > +++++++++++++++++++++++++++ > > board/keymile/km_arm/Makefile | 8 + > > board/keymile/km_arm/fpga_config.c | 212 > +++++++++++++++++++ > > board/keymile/km_arm/km_arm.c | 119 +++++++----- > > board/keymile/km_arm/kwbimage-memphis.cfg | 2 +- > > board/keymile/km_arm/managed_switch.c | 166 +++++++++++++++ > > boards.cfg | 10 +- > > include/configs/km/km_arm.h | 60 ++++-- > > include/configs/km_kirkwood.h | 157 +++++++++++++-- > > include/configs/mgcoge3un.h | 86 -------- > > include/configs/portl2.h | 85 -------- > > 15 files changed, 1256 insertions(+), 259 deletions(-) > > create mode 100644 board/keymile/km_arm/128M16-1.cfg > > create mode 100644 board/keymile/km_arm/256M8-1.cfg > > create mode 100644 board/keymile/km_arm/fpga_config.c > > create mode 100644 board/keymile/km_arm/managed_switch.c > > delete mode 100644 include/configs/mgcoge3un.h > > delete mode 100644 include/configs/portl2.h > > > > We would love to get a feedback from you about this series. The merge > window for > 2012.06 is soon over and we would like to see these in the marvell > tree before > your pull request for this merge window (I guess you have a pull > request planned > for the current merge window ?)
Since you have posted patched within/before merge window closure, those are eligible to go on master branch. So don't worry, I will review them. Regards.. Prafulla . . . > > Best Regards > > -- > Valentin Longchamp > Embedded Software Engineer > Hardware and Chip Integration > ______________________________________ > KEYMILE AG > Schwarzenburgstr. 73 > CH-3097 Liebefeld > Phone +41 31 377 1318 > Fax +41 31 377 1212 > valentin.longch...@keymile.com > www.keymile.com > ______________________________________ > KEYMILE: A Specialist as a Partner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
