Prafulla, On 03/26/2012 01:34 PM, Valentin Longchamp wrote: > This patch series updates keymile boards with Kirkwood CPU and adds > two new boards. This new boards are kmnusa and kmcoge5un. Also the > existing boards with own config files were migrated to the common > header km_kirkwood.h. Some small adaption in generic kirkwood code > was needed due to two new features on the new board. First one is > that the u-boot environment is in the SPI NOR flash and the second one > is the direct MAC/MAC connection from the mvgbe interface to an > simple switch. > > Changes for v2: > - removed the two patches "spi/kirkwood: add weak functions > board_spi_bus_claim/release" and "mvgbe: remove warning for > unused methods" from the series as they are were independent from > it. The series is however dependent of these two patches. > > Holger Brunck (13): > arm/km: add board type to boards.cfg > arm/km: add piggy mac adress offset for mgcoge3un > arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE > arm/km: use ARRAY_SIZE macro > arm/km: fix wrong comment in SDRAM config for mgcoge3un > arm/km: change maintainer for mgcoge3un > arm/km: remove CONFIG_RESET_PHY_R > km/arm: remove spi toggle command > arm/km: add kmnusa board support > arm/km: add kmcoge5un board support > arm/km: convert mgcoge3un target to km_kirkwood > arm/km: remove portl2.h and use km_kirkwood instead > arm/km: cleanup km_kirkwood boards > > Valentin Longchamp (6): > arm/km: enable mii cmd > arm/km: use correct kw_gpio function for NAND/SPI switching > arm/km: implement weak function board_spi_clam_bus/release > arm/kirkwood: protect the ENV_SPI #defines > arm/km: correct init of 88e6352 switch in the reset_phy function > arm/km: enable BOCO2 FPGA download support > > MAINTAINERS | 4 +- > arch/arm/include/asm/arch-kirkwood/config.h | 12 +- > board/keymile/common/common.h | 12 + > board/keymile/km_arm/128M16-1.cfg | 290 ++++++++++++++++++++++++++ > board/keymile/km_arm/256M8-1.cfg | 292 > +++++++++++++++++++++++++++ > board/keymile/km_arm/Makefile | 8 + > board/keymile/km_arm/fpga_config.c | 212 +++++++++++++++++++ > board/keymile/km_arm/km_arm.c | 119 +++++++----- > board/keymile/km_arm/kwbimage-memphis.cfg | 2 +- > board/keymile/km_arm/managed_switch.c | 166 +++++++++++++++ > boards.cfg | 10 +- > include/configs/km/km_arm.h | 60 ++++-- > include/configs/km_kirkwood.h | 157 +++++++++++++-- > include/configs/mgcoge3un.h | 86 -------- > include/configs/portl2.h | 85 -------- > 15 files changed, 1256 insertions(+), 259 deletions(-) > create mode 100644 board/keymile/km_arm/128M16-1.cfg > create mode 100644 board/keymile/km_arm/256M8-1.cfg > create mode 100644 board/keymile/km_arm/fpga_config.c > create mode 100644 board/keymile/km_arm/managed_switch.c > delete mode 100644 include/configs/mgcoge3un.h > delete mode 100644 include/configs/portl2.h >
We would love to get a feedback from you about this series. The merge window for 2012.06 is soon over and we would like to see these in the marvell tree before your pull request for this merge window (I guess you have a pull request planned for the current merge window ?) Best Regards -- Valentin Longchamp Embedded Software Engineer Hardware and Chip Integration ______________________________________ KEYMILE AG Schwarzenburgstr. 73 CH-3097 Liebefeld Phone +41 31 377 1318 Fax +41 31 377 1212 valentin.longch...@keymile.com www.keymile.com ______________________________________ KEYMILE: A Specialist as a Partner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
