Dear Fabio Estevam, > Split the README into a common part and a m28 specific part. > > This will make things easier when adding new README files for other mx28 > based boards. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > --- > doc/README.m28 | 217 > +--------------------------------------------- doc/README.mx28_common | > 226 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 229 > insertions(+), 214 deletions(-) > create mode 100644 doc/README.mx28_common > > diff --git a/doc/README.m28 b/doc/README.m28 > index 548982f..9622a55 100644 > --- a/doc/README.m28 > +++ b/doc/README.m28 > @@ -1,28 +1,7 @@ > DENX M28EVK > =========== > > -This document describes the DENX M28/M28EVK U-Boot port. This document > mostly -covers topics related to making the module/board bootable. > - > -Terminology > ------------ > - > -The dollar symbol ($) introduces a snipped of shell code. This shall be > typed -into the unix command prompt in U-Boot source code root directory. > - > -The (=>) introduces a snipped of code that should by typed into U-Boot > command -prompt. > - > -Contents > --------- > - > -0) Files of the M28/M28EVK port > -1) Prerequisites > -2) Compiling U-Boot for M28 > -3) Installation of U-Boot for M28EVK to SD card > -4) Installation of U-Boot for M28 to NAND flash > - > -0) Files of the M28/M28EVK port > +Files of the M28/M28EVK port > -------------------------------
Fix the length of underlining here ;-) Otherwise, fine by me, will ACK V2. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
