Dear Fabio Estevam, > Add a README file for mx28evk board. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
Acked-by: Marek Vasut <ma...@denx.de> > --- > doc/README.mx28evk | 29 +++++++++++++++++++++++++++++ > 1 files changed, 29 insertions(+), 0 deletions(-) > create mode 100644 doc/README.mx28evk > > diff --git a/doc/README.mx28evk b/doc/README.mx28evk > new file mode 100644 > index 0000000..c6c3d37 > --- /dev/null > +++ b/doc/README.mx28evk > @@ -0,0 +1,29 @@ > +FREESCALE MX28EVK > +================== > + > +Supported hardware: only MX28EVK rev D is supported in U-boot. > + > +Files of the MX28EVK port > +-------------------------- > + > +arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale > i.MX28 +arch/arm/include/asm/arch-mx28/ - Header files for the Freescale > i.MX28 +board/freescale/mx28evk/ - MX28EVK board specific files > +include/configs/mx28evk.h - MX28EVK configuration file > + > +Jumper configuration > +--------------------- > + > +To boot MX28EVK from an SD card, set the boot mode DIP switches as: > + > + * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42) > + * JTAG PSWITCH RESET: To the left (reset enabled) > + * Battery Source: Down > + * Wall 5V: Up > + * VDD 5V: To the left (off) > + * Hold Button: Down (off) > + > +Follow the instructions from doc/README.mx28_common to generate a bootable > SD +card. > + > +Insert the SD card in slot 0, power up the board and U-boot will boot. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
