On 29.02.2012 20:44, Fabio Estevam wrote:
Setup mx31 AIPS registers.

It was verified on a mx31pdk that without the AIPS settings it is not possible
to run audio playback.

Signed-off-by: Fabio Estevam<fabio.este...@freescale.com>

Hmm, sorry if I missed anything because it's too late here. But:

Why now an U-Boot patch? What's about the kernel patch you sent earlier?

http://www.spinics.net/lists/arm-kernel/msg162109.html

And why don't you try to create some common parts with

http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=f2f7745825ee5f6bae5b480c8e9c6641a7ffa73b

?

Sorry again if I missed anything, best regards

Dirk

---
Changes since v1:
- Use CONFIG_ARCH_CPU_INIT
- Zero-out the 8 MSB of opacr4
- Confirmed that audio playback does work

  arch/arm/cpu/arm1136/mx31/generic.c       |   46 +++++++++++++++++++++++++++++
  arch/arm/include/asm/arch-mx31/imx-regs.h |   13 ++++++++
  include/configs/mx31pdk.h                 |    1 +
  3 files changed, 60 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/arm1136/mx31/generic.c 
b/arch/arm/cpu/arm1136/mx31/generic.c
index d60afc9..a401c9a 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -228,3 +228,49 @@ int print_cpuinfo(void)
        return 0;
  }
  #endif
+
+#ifdef CONFIG_ARCH_CPU_INIT
+void init_aips(void)
+{
+       struct aipstz_regs *aips1, *aips2;
+       unsigned int reg;
+
+       aips1 = (struct aipstz_regs *)MX31_AIPS1_BASE_ADDR;
+       aips2 = (struct aipstz_regs *)MX31_AIPS2_BASE_ADDR;
+
+       /*
+        * Set all MPROTx to be non-bufferable, trusted for R/W,
+        * not forced to user-mode.
+        */
+       writel(0x77777777,&aips1->mprot0);
+       writel(0x77777777,&aips1->mprot1);
+       writel(0x77777777,&aips2->mprot0);
+       writel(0x77777777,&aips2->mprot1);
+
+       /*
+        * Set all OPACRx to be non-bufferable, not require
+        * supervisor privilege level for access, allow for
+        * write access and untrusted master access.
+        */
+       writel(0x0,&aips1->opacr0);
+       writel(0x0,&aips1->opacr1);
+       writel(0x0,&aips1->opacr2);
+       writel(0x0,&aips1->opacr3);
+       reg = readl(&aips1->opacr4)&  0x00FFFFFF;
+       writel(reg,&aips1->opacr4);
+
+       writel(0x0,&aips2->opacr0);
+       writel(0x0,&aips2->opacr1);
+       writel(0x0,&aips2->opacr2);
+       writel(0x0,&aips2->opacr3);
+       reg = readl(&aips2->opacr4)&  0x00FFFFFF;
+       writel(reg,&aips2->opacr4);
+}
+
+int arch_cpu_init(void)
+{
+       init_aips();
+
+       return 0;
+}
+#endif
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h 
b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 6454acb..11069af 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -539,6 +539,18 @@ struct esdc_regs {
        u32 dlyl;
  };

+/* AIPS registers */
+struct aipstz_regs {
+       u32     mprot0;
+       u32     mprot1;
+       u32     rsvd[0xe];
+       u32     opacr0;
+       u32     opacr1;
+       u32     opacr2;
+       u32     opacr3;
+       u32     opacr4;
+};
+
  #endif

  #define __REG(x)     (*((volatile u32 *)(x)))
@@ -873,6 +885,7 @@ struct esdc_regs {
  #define IRAM_SIZE     (16 * 1024)

  #define MX31_AIPS1_BASE_ADDR  0x43f00000
+#define MX31_AIPS2_BASE_ADDR   0x53f00000
  #define IMX_USB_BASE          (MX31_AIPS1_BASE_ADDR + 0x88000)

  /* USB portsc */
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 4da6020..623b1f7 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -40,6 +40,7 @@

  #define CONFIG_DISPLAY_CPUINFO
  #define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_ARCH_CPU_INIT

  #define CONFIG_CMDLINE_TAG                    /* enable passing of ATAGs */
  #define CONFIG_SETUP_MEMORY_TAGS

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to