Hi Wolfgang,
The following changes since commit 54e96680cb96fb7a4b8f43fd949c62054004d3e5:
Merge branch 'master' of git://git.denx.de/u-boot-microblaze
(2012-02-26 22:17:40 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
Aneesh V (1):
armv7: omap3: leave outer cache enabled
Chase Maupin (1):
am33xx: ddr_defs.h: Change DDR timings
Daniel Gorsulowski (2):
at91: modified NAND flash timing on meesc board
at91: modified NAND flash timing on otc570 board
Detlev Zundel (1):
mcx: Enable command line editing
Eric Nelson (6):
mx6q: define GPIO macros for translating between ordinals and
port:index
mxc_spi: move machine specifics into CPU headers
mx6q: Add support for ECSPI through mxc_spi driver
mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
mx6q: mx6qsabrelite: Conditionally define macros for environment
in serial flash
Fabio Estevam (7):
mx53loco: Use gpio_direction_input prior to gpio_get_value
mx53ard: Use gpio_direction_input prior to gpio_get_value
mx53evk: Use gpio_direction_input prior to gpio_get_value
mx53smd: Use gpio_direction_input prior to gpio_get_value
mx51evk: Use gpio_direction_input prior to gpio_get_value
mx35: generic: Let get_reset_cause be defined only when
CONFIG_DISPLAY_CPUINFO is selected
mx35pdk: Remove duplicate CPU revision and reset cause information
Hadli, Manjunath (3):
davinci: cleanup davinci_sync_env_enetaddr() fucntion
da850evm: add support to read mac address from SPI flash
da850evm: read mac address from I2C EEPROM on AM18x EVM
Helmut Raiger (3):
tt01: fix environment size
tt01: add video support
tt01: fix hush parser config, add release config
Linus Walleij (3):
integrator: stop calling pci_init() twice
integrator: rewrite the AP PCI driver
integrator: update the Integrator/CP config
Marek Vasut (2):
i.MX28: Fix VDDIO and VDDA setup
MX28: Fix get_timer() / get_tbclk() issue
Matthias Fuchs (4):
mx28evk: add RTC support
mx28evk: add USB support
mx28evk: add SPI support
mx28: fix SPL code to make USB booting work
Peter Meerwald (1):
beagle: enable DVI_PUP
Shawn Guo (1):
common/image.c: align usage of fdt_high with initrd_high
Stefano Babic (4):
MX35: add missing get_ticks() and get_tbclk()
MX31: add missing get_tbclk()
MX5/MX6: add missing get_ticks() and get_tbclk()
MX27: add missing get_tbclk()
Thomas Weber (2):
Tricorder: Switch env to generic mmc driver
OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL
Tom Rini (2):
am335x_evm: Change MAINTAINERS entry
omap3_beagle: Change MAINTAINERS entry
Troy Kisky (5):
net: fec_mxc: add 1000 Mbps selection
net: fec_mxc: add PHYLIB support
net: phy: add support for Micrel's KSZ9021
net: phy: make board_phy_config responsible for calling drv->config
i.mx6q: mx6qsabrelite: Update the network configuration
prabhakar.cse...@gmail.com (1):
dm6467Tevm: Use a common configuration file for davinci_dm6467evm
and davinci_dm6467Tevm
MAINTAINERS | 10 +-
README | 8 +
arch/arm/cpu/arm1136/mx31/timer.c | 9 +
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
arch/arm/cpu/arm1136/mx35/timer.c | 103 +++--
arch/arm/cpu/arm926ejs/davinci/cpu.c | 2 +-
arch/arm/cpu/arm926ejs/davinci/misc.c | 9 +-
arch/arm/cpu/arm926ejs/mx27/timer.c | 5 +
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +-
arch/arm/cpu/arm926ejs/mx28/start.S | 21 +-
arch/arm/cpu/arm926ejs/mx28/timer.c | 19 +-
arch/arm/cpu/armv7/imx-common/timer.c | 75 +++-
arch/arm/cpu/armv7/omap3/board.c | 2 +-
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 2 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 27 ++
arch/arm/include/asm/arch-mx31/sys_proto.h | 1 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 25 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 30 ++
arch/arm/include/asm/arch-mx6/imx-regs.h | 49 ++
board/armltd/integrator/integrator.c | 3 -
board/armltd/integrator/pci.c | 582
++++++++++++++-----------
board/armltd/integrator/pci_v3.h | 200 +++++++++
board/davinci/da8xxevm/da850evm.c | 103 +++++
board/davinci/dm6467evm/dm6467evm.c | 2 +-
board/esd/meesc/meesc.c | 8 +-
board/esd/otc570/otc570.c | 8 +-
board/freescale/corenet_ds/eth_p4080.c | 2 +
board/freescale/mpc8544ds/mpc8544ds.c | 2 +
board/freescale/mx28evk/iomux.c | 8 +
board/freescale/mx28evk/mx28evk.c | 7 +
board/freescale/mx35pdk/mx35pdk.c | 27 +--
board/freescale/mx51evk/mx51evk.c | 2 +
board/freescale/mx53ard/mx53ard.c | 2 +
board/freescale/mx53evk/mx53evk.c | 2 +
board/freescale/mx53loco/mx53loco.c | 2 +
board/freescale/mx53smd/mx53smd.c | 1 +
board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 68 ++--
board/hale/tt01/tt01.c | 21 +
board/ti/beagle/beagle.c | 34 ++
boards.cfg | 8 +-
common/image.c | 12 +-
drivers/net/fec_mxc.c | 165 +++++---
drivers/net/fec_mxc.h | 7 +
drivers/net/phy/micrel.c | 87 ++++
drivers/net/phy/phy.c | 5 +-
drivers/spi/mxc_spi.c | 93 +----
include/configs/davinci_dm6467Tevm.h | 167 -------
include/configs/davinci_dm6467evm.h | 1 -
include/configs/integratorap.h | 148 +------
include/configs/integratorcp.h | 47 +--
include/configs/mcx.h | 7 +-
include/configs/mx28evk.h | 64 +++-
include/configs/mx6qsabrelite.h | 31 ++-
include/configs/omap3_overo.h | 4 -
include/configs/tricorder.h | 12 +-
include/configs/tt01.h | 40 ++-
include/micrel.h | 16 +
include/phy.h | 1 +
59 files changed, 1495 insertions(+), 921 deletions(-)
create mode 100644 board/armltd/integrator/pci_v3.h
delete mode 100644 include/configs/davinci_dm6467Tevm.h
create mode 100644 include/micrel.h
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
