Dear Albert ARIBAUD,
In message <4f755c4a.5090...@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 7cb30b13f12077c7eec8ce2419cd96cd65ace8e2:
>
> Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
> (2012-03-23 21:59:16 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> Anatolij Gustschin (4):
> nhk8815: fix build errors
> board/vpac270/onenand.c: Fix build errors
> board/ti/beagle/beagle.c: Fix build warnings
> arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings
>
> Andreas Bie�mann (1):
> atmel-boards: add missing atmel_mci.h
>
> Chander Kashyap (1):
> EXYNOS: Add structure for Exynos4 DMC
>
> Christian Riesch (1):
> calimain, enbw_cmc: Fix typo in comments
>
> David M�ller (ELSOFT AG) (1):
> ARM: fix s3c2410 timer code
>
> Dirk Behme (2):
> mx6q: mx6qsabrelite: Update the README
> imximage: Remove overwriting of flash_offset
>
> Doug Anderson (1):
> EXYNOS: SMDK5250: Support all 4 UARTs
>
> Eric Nelson (6):
> i.MX6: mx6qsabrelite: add ext2 support
> mx6q: mx6qsabrelite: setup_spi() should be called in board_init
> to allow use for environment
> i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
> i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
> net: force PKTALIGN to ARCH_DMA_MINALIGN
> net: fec_mxc: allow use with cache enabled
>
> Fabio Estevam (15):
> mx51evk: Fix CONFIG_SYS_MEMTEST_END
> mx53evk: Fix CONFIG_SYS_MEMTEST_END
> mx53smd: Fix CONFIG_SYS_MEMTEST_END
> efikamx: Fix CONFIG_SYS_MEMTEST_END
> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
> mx6: Fix reset cause for Power On Reset case
> mx6: Remove duplicate definition of ANATOP_BASE_ADDR
> pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
> mxs_spi: Return proper timeout error
> mx6: Read silicon revision from register
> USB: ehci-mx6: Add proper IO accessors
> mx28evk: Provide default values for SPI bus and chip select
> configs: imx: Use CONFIG_SF_DEFAULT_CS
> mx53: Make PLL2 to be the parent of UART clock
> mx53ard: Initialize return code with error
>
> Grazvydas Ignotas (1):
> twl4030: fix potential power supply handling issues
>
> Heiko Schocher (1):
> ARM: davinci: fixes for cam_enc_4xx board
>
> Helmut Raiger (1):
> mx31: add "ARM11P power gating" to get_reset_cause
>
> Jason Hobbs (1):
> ARM: highbank: change env config to use nvram
>
> Marek Vasut (23):
> PXA: Remove PXA PCMCIA support
> PXA: Fix warning in zipitz2
> PXA: Fix missing get_tbclk() breaking vpac boards
> M28: Fix LCD PINMUX
> M28: Support for the old M28 SoM v1.0
> i.MX28: Reformat the DRAM memory configuration data
> Examples: Properly append LDFLAGS to LD command
> IXP: Make IXP buildable with arm-linux- toolchains
> IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
> IXP: Squash warnings in IXP NPE
> IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
> IXP: Fix NAND build warning on PDNB3 and SCPU
> IXP: Fix GPIO_INT_ACT_LOW_SET()
> i.MX28: Enable additional DRAM address bits
> i.MX28: Make the stabilization delays shorter
> i.MX28: Drop __naked function from spl_mem_init
> ARM926EJS: Implement cache operations
> i.MX28: Add cache support into the APBH DMA driver
> i.MX28: Add cache support to MXS NAND driver
> MMC: Implement generic bounce buffer
> i.MX28: Do data transfers via DMA in MMC driver
> i.MX28: Make use of the bounce buffer
> i.MX28: Enable caches by default
>
> Matt Porter (2):
> SPL: Add YMODEM over UART load support
> SPL: Enable YMODEM support on BeagleBone and AM335x EVM
>
> Rob Herring (8):
> net: calxedaxgmac: fix build due to missing __aligned definition
> ARM: highbank: fix warning for calxedaxgmac_initialize
> ARM: highbank: add missing get_tbclk
> ARM: highbank: fix us_to_tick calculation
> ARM: highbank: change TEXT_BASE to 0x8000
> ARM: highbank: Add boot counter support
> ARM: highbank: add reset support
> ARM: highbank: setup env from boot source register
>
> Robert Delien (5):
> i.mx28: Added register definitions for DIGCTL registers
> i.mx28: Replaced magic numbers for scratch register addresses
> with register definitions
> Renamed mx28_register to mx28_register_32 to prepare for
> mx28_register_8
> Introducing 8-bit wide register, mx28_register_8
> Fix erroneous 32-bit access to hw_clkctrl_frac0 and
> hw_clkctrl_frac1 registers
>
> Simon Glass (39):
> arm: Remove jornada link script
> fdt: Add fdtdec_find_aliases() to deal with alias nodes
> fdt: Add tests for fdtdec
> fdt: Tidy up a few fdtdec problems
> fdt: Add functions to access phandles, arrays and bools
> fdt: Add basic support for decoding GPIO definitions
> arm: fdt: Add skeleton device tree file from kernel
> tegra: fdt: Add Tegra2x device tree file from kernel
> tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
> fdt: Add staging area for device tree binding documentation
> fdt: Add tegra-usb bindings file from linux
> tegra: fdt: Add additional USB binding
> tegra: fdt: Add clock bindings
> tegra: fdt: Add clock bindings for Tegra2 Seaboard
> tegra: usb: fdt: Add additional device tree definitions for USB ports
> tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
> usb: Add support for txfifo threshold
> tegra: fdt: Add function to return peripheral/clock ID
> tegra: usb: Add support for Tegra USB peripheral
> fdt: Avoid early panic() when there is no FDT present
> arm: Check for valid FDT after console is up
> tegra: usb: Add USB support to nvidia boards
> tegra: usb: Add common USB defines for tegra2 boards
> tegra: usb: Enable USB on Seaboard
> tegra: fdt: Enable FDT support for Seaboard
> tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
> fdt: Add function to allow aliases to refer to multiple nodes
> tegra: Enhance clock support to handle 16-bit clock divisors
> tegra: i2c: Initialise I2C on Nvidia boards
> tegra: i2c: Select number of controllers for Tegra2 boards
> tegra: i2c: Enable I2C on Seaboard
> tegra: i2c: Select I2C ordering for Seaboard
> tegra: fdt: i2c: Add extra I2C bindings for U-Boot
> Allow arch directory to contain .lds without requiring Makefile
> arm: Remove zipitz2 link script
> Define CPUDIR for the .lds link script
> arm: Remove unneeded setting of LDCSRIPT
> arm: add a common .lds link script
> arm: Use common .lds file where possible
>
> Simon Schwarz (8):
> Add cmd_spl command
> devkit8000: add config for spl command
> omap-common: Add NAND SPL linux booting
> devkit8000/spl: init GPMC for dm9000 in SPL
> omap-common/spl: Add linux boot to SPL
> omap/spl: change output of spl_parse_image_header
> devkit8000: Implement and activate direct OS boot
> arm: Add Prep subcommand support to bootm
>
> Stefano Babic (8):
> Add cache functions to SPL for armv7
> OMAP3: SPL: do not call I2C init if no I2C is set.
> SPL: call cleanup_before_linux() before booting Linux
> OMAP3: twister: add support to boot Linux from SPL
> NAND: TI: fix warnings in omap_gpmc.c
> OMAP3: mt_ventoux: updated timing for FPGA
> OMAP3: mt_ventoux: sets its own mtdparts
> Davinci: ea20: use gpio framework to access gpios
>
> Tom Rini (9):
> .gitignore: Add .su files
> config.mk: Make cc-option create a file under include/generated
> config.mk: Check for -fstack-usage support
> spl.c: Use __noreturn decorator
> README: document more SPL config options
> SPL: Add README.omap3
> cam_enc_4xx: Rename 'images' to 'imgs'
> sdrc.c: Fix typo in do_sdrc_init() for SPL
> OMAP: Remove omap1610inn-based boards
>
> Tom Warren (2):
> arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer
> load
> tegra: fdt: Enable FDT support for Ventana
>
> Vasily Khoruzhick (2):
> zipitz2: fix boot issue introduced by PXA low level init rework
> zipitz2: use pxa_mmc_gen as MMC driver
>
> Wolfgang Grandegger (2):
> usb/ehci: Add USB support for the MX6Q
> mx6qsabrelite: add and enable USB Host 1 support
>
> Yen Lin (1):
> tegra: i2c: Add I2C driver
>
> jacopo mondi (1):
> omap3_spi: receive transmit mode
>
> .gitignore | 1 +
> MAINTAINERS | 1 -
> Makefile | 25 +-
> README | 72 +++-
> arch/arm/config.mk | 7 -
> arch/arm/cpu/arm1136/mx31/generic.c | 2 +
> arch/arm/cpu/arm1136/u-boot.lds | 89 ---
> arch/arm/cpu/arm1176/u-boot.lds | 78 ---
> arch/arm/cpu/arm720t/u-boot.lds | 79 ---
> arch/arm/cpu/arm920t/s3c24x0/timer.c | 64 +--
> arch/arm/cpu/arm920t/u-boot.lds | 88 ---
> arch/arm/cpu/arm925t/u-boot.lds | 83 ---
> arch/arm/cpu/arm926ejs/cache.c | 66 ++-
> arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +--
> arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 24 +-
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 130 +++---
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
> arch/arm/cpu/arm926ejs/nomadik/timer.c | 10 +
> arch/arm/cpu/arm926ejs/u-boot.lds | 80 ---
> arch/arm/cpu/arm946es/u-boot.lds | 80 ---
> arch/arm/cpu/arm_intcm/u-boot.lds | 80 ---
> arch/arm/cpu/armv7/Makefile | 2 -
> arch/arm/cpu/armv7/cpu.c | 2 +
> arch/arm/cpu/armv7/highbank/Makefile | 2 +-
> arch/arm/cpu/armv7/highbank/bootcount.c | 36 ++
> arch/arm/cpu/armv7/highbank/config.mk | 1 +
> arch/arm/cpu/armv7/highbank/timer.c | 9 +-
> arch/arm/cpu/armv7/imx-common/cpu.c | 25 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 20 +-
> arch/arm/cpu/armv7/mx6/clock.c | 13 +
> arch/arm/cpu/armv7/mx6/soc.c | 8 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 3 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 56 ++-
> arch/arm/cpu/armv7/omap-common/spl_nand.c | 47 ++-
> arch/arm/cpu/armv7/omap-common/spl_ymodem.c | 76 +++
> arch/arm/cpu/armv7/omap3/board.c | 2 +
> arch/arm/cpu/armv7/omap3/sdrc.c | 2 +-
> arch/arm/cpu/armv7/tegra2/Makefile | 4 +-
> arch/arm/cpu/armv7/tegra2/ap20.c | 20 +-
> arch/arm/cpu/armv7/tegra2/board.c | 2 +-
> arch/arm/cpu/armv7/tegra2/clock.c | 121 ++++-
> arch/arm/cpu/armv7/tegra2/config.mk | 2 +
> arch/arm/cpu/armv7/tegra2/usb.c | 460 ++++++++++++++++
> arch/arm/cpu/ixp/config.mk | 3 +
> arch/arm/cpu/ixp/npe/IxEthAcc.c | 2 +-
> arch/arm/cpu/ixp/npe/IxEthDBAPISupport.c | 3 -
> arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c | 3 -
> arch/arm/cpu/lh7a40x/u-boot.lds | 80 ---
> arch/arm/cpu/pxa/timer.c | 5 +
> arch/arm/cpu/pxa/u-boot.lds | 86 ---
> arch/arm/cpu/s3c44b0/u-boot.lds | 80 ---
> arch/arm/cpu/sa1100/u-boot.lds | 83 ---
> arch/arm/cpu/{armv7 => }/u-boot.lds | 15 +-
> arch/arm/dts/skeleton.dtsi | 13 +
> arch/arm/dts/tegra20.dtsi | 196 +++++++
> arch/arm/include/asm/arch-exynos/dmc.h | 109 ++++
> arch/arm/include/asm/arch-ixp/ixp425.h | 10 +-
> arch/arm/include/asm/arch-mx28/imx-regs.h | 1 +
> arch/arm/include/asm/arch-mx28/regs-apbh.h | 254 +++++-----
> arch/arm/include/asm/arch-mx28/regs-bch.h | 42 +-
> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++--
> arch/arm/include/asm/arch-mx28/regs-common.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 ++++++
> arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 +-
> arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++--
> arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 +++---
> arch/arm/include/asm/arch-mx28/regs-power.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 +-
> arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 +-
> arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +-
> arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +-
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 146 +++++-
> arch/arm/include/asm/arch-tegra2/clk_rst.h | 10 +-
> arch/arm/include/asm/arch-tegra2/clock.h | 13 +
> arch/arm/include/asm/arch-tegra2/tegra2.h | 6 +-
> arch/arm/include/asm/arch-tegra2/tegra_i2c.h | 157 ++++++
> arch/arm/include/asm/arch-tegra2/usb.h | 252 +++++++++
> arch/arm/include/asm/bootm.h | 26 +
> arch/arm/include/asm/omap_common.h | 5 +
> arch/arm/lib/Makefile | 5 +-
> arch/arm/lib/board.c | 8 +
> arch/arm/lib/bootm.c | 349 ++++++------
> board/actux1/actux1.c | 2 -
> board/actux2/actux2.c | 2 -
> board/actux3/actux3.c | 2 -
> board/actux4/actux4.c | 2 -
> board/ait/cam_enc_4xx/cam_enc_4xx.c | 103 +++--
> board/ait/cam_enc_4xx/config.mk | 7 +
> board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +-
> board/davinci/ea20/ea20.c | 38 +-
> board/denx/m28evk/spl_boot.c | 16 +-
> board/dvlhost/dvlhost.c | 2 -
> board/egnite/ethernut5/ethernut5.c | 1 +
> board/emk/top9000/top9000.c | 1 +
> board/enbw/enbw_cmc/enbw_cmc.c | 2 +-
> board/freescale/mx53ard/mx53ard.c | 2 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 31 +-
> board/highbank/highbank.c | 23 +
> board/nvidia/common/board.c | 19 +
> board/nvidia/common/board.h | 6 +
> board/nvidia/dts/tegra2-seaboard.dts | 92 ++++
> board/nvidia/seaboard/seaboard.c | 6 +
> board/omicron/calimain/calimain.c | 2 +-
> board/prodrive/pdnb3/nand.c | 16 +-
> board/prodrive/pdnb3/pdnb3.c | 3 -
> board/samsung/smdk5250/smdk5250.c | 44 ++-
> board/technexion/twister/twister.c | 23 +
> board/teejet/mt_ventoux/mt_ventoux.h | 11 +-
> board/ti/beagle/beagle.c | 3 +-
> board/ti/omap1610inn/Makefile | 45 --
> board/ti/omap1610inn/config.mk | 26 -
> board/ti/omap1610inn/flash.c | 495
> -----------------
> board/ti/omap1610inn/lowlevel_init.S | 452 ----------------
> board/ti/omap1610inn/omap1610innovator.c | 309 -----------
> board/timll/devkit8000/devkit8000.c | 37 ++
> board/vpac270/onenand.c | 3 -
> board/zipitz2/zipitz2.c | 9 +
> boards.cfg | 10 +-
> common/Makefile | 4 +
> common/cmd_spl.c | 188 +++++++
> config.mk | 11 +-
> doc/README.PXA_CF | 56 --
> doc/README.commands.spl | 31 ++
> doc/README.mx6qsabrelite | 12 +-
> doc/SPL/README.omap3 | 74 +++
> doc/device-tree-bindings/README | 17 +
> .../clock/nvidia,tegra20-car.txt | 207 +++++++
> doc/device-tree-bindings/i2c/tegra20-i2c.txt | 23 +
> doc/device-tree-bindings/usb/tegra-usb.txt | 25 +
> drivers/dma/apbh_dma.c | 23 +-
> drivers/gpio/mxs_gpio.c | 16 +-
> drivers/i2c/Makefile | 1 +
> drivers/i2c/tegra_i2c.c | 569
> ++++++++++++++++++++
> drivers/misc/pmic_i2c.c | 6 +
> drivers/mmc/mmc.c | 102 ++++-
> drivers/mmc/mxsmmc.c | 70 ++-
> drivers/mtd/nand/mxs_nand.c | 53 ++-
> drivers/mtd/nand/omap_gpmc.c | 14 +-
> drivers/net/calxedaxgmac.c | 1 +
> drivers/net/fec_mxc.c | 277 +++++++---
> drivers/net/fec_mxc.h | 19 +-
> drivers/pcmcia/Makefile | 1 -
> drivers/pcmcia/pxa_pcmcia.c | 93 ----
> drivers/power/twl4030.c | 18 +-
> drivers/spi/mxs_spi.c | 6 +-
> drivers/spi/omap3_spi.c | 66 +++-
> drivers/spi/omap3_spi.h | 2 +
> drivers/usb/host/Makefile | 2 +
> drivers/usb/host/ehci-hcd.c | 7 +
> drivers/usb/host/ehci-mx6.c | 200 +++++++
> drivers/usb/host/ehci-mxs.c | 8 +-
> .../u-boot.lds => drivers/usb/host/ehci-tegra.c | 62 ++-
> drivers/usb/host/ehci.h | 6 +-
> examples/standalone/Makefile | 2 +-
> board/zipitz2/u-boot.lds => include/cmd_spl.h | 43 +--
> include/configs/actux1.h | 2 +
> include/configs/actux2.h | 2 +
> include/configs/actux3.h | 2 +
> include/configs/actux4.h | 2 +
> include/configs/am335x_evm.h | 1 +
> include/configs/cam_enc_4xx.h | 13 +-
> include/configs/devkit8000.h | 15 +-
> include/configs/dvlhost.h | 2 +
> include/configs/ea20.h | 2 +
> include/configs/efikamx.h | 4 +-
> include/configs/highbank.h | 21 +-
> include/configs/m28evk.h | 3 +-
> include/configs/mt_ventoux.h | 10 +
> include/configs/mx28evk.h | 3 +
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/mx6qsabrelite.h | 17 +
> include/configs/omap1610h2.h | 197 -------
> include/configs/omap1610inn.h | 202 -------
> include/configs/pdnb3.h | 2 +
> include/configs/seaboard.h | 20 +
> include/configs/tegra2-common.h | 13 +
> include/configs/twister.h | 12 +
> include/configs/ventana.h | 5 +
> include/configs/vision2.h | 2 +-
> include/configs/zipitz2.h | 14 +-
> include/fdtdec.h | 197 +++++++-
> include/image.h | 2 +
> include/net.h | 3 +-
> include/pcmcia.h | 3 +-
> lib/Makefile | 4 +
> lib/fdtdec.c | 323 +++++++++++-
> lib/fdtdec_test.c | 226 ++++++++
> spl/Makefile | 4 +
> tools/imximage.c | 18 +-
> tools/imximage.h | 1 +
> 198 files changed, 6109 insertions(+), 4188 deletions(-)
> delete mode 100644 arch/arm/cpu/arm1136/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm1176/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm720t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm920t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm925t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm926ejs/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm946es/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm_intcm/u-boot.lds
> create mode 100644 arch/arm/cpu/armv7/highbank/bootcount.c
> create mode 100644 arch/arm/cpu/armv7/highbank/config.mk
> create mode 100644 arch/arm/cpu/armv7/omap-common/spl_ymodem.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/usb.c
> delete mode 100644 arch/arm/cpu/lh7a40x/u-boot.lds
> delete mode 100644 arch/arm/cpu/pxa/u-boot.lds
> delete mode 100644 arch/arm/cpu/s3c44b0/u-boot.lds
> delete mode 100644 arch/arm/cpu/sa1100/u-boot.lds
> rename arch/arm/cpu/{armv7 => }/u-boot.lds (88%)
> create mode 100644 arch/arm/dts/skeleton.dtsi
> create mode 100644 arch/arm/dts/tegra20.dtsi
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/tegra_i2c.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/usb.h
> create mode 100644 arch/arm/include/asm/bootm.h
> create mode 100644 board/nvidia/dts/tegra2-seaboard.dts
> delete mode 100644 board/ti/omap1610inn/Makefile
> delete mode 100644 board/ti/omap1610inn/config.mk
> delete mode 100644 board/ti/omap1610inn/flash.c
> delete mode 100644 board/ti/omap1610inn/lowlevel_init.S
> delete mode 100644 board/ti/omap1610inn/omap1610innovator.c
> create mode 100644 common/cmd_spl.c
> delete mode 100644 doc/README.PXA_CF
> create mode 100644 doc/README.commands.spl
> create mode 100644 doc/SPL/README.omap3
> create mode 100644 doc/device-tree-bindings/README
> create mode 100644 doc/device-tree-bindings/clock/nvidia,tegra20-car.txt
> create mode 100644 doc/device-tree-bindings/i2c/tegra20-i2c.txt
> create mode 100644 doc/device-tree-bindings/usb/tegra-usb.txt
> create mode 100644 drivers/i2c/tegra_i2c.c
> delete mode 100644 drivers/pcmcia/pxa_pcmcia.c
> create mode 100644 drivers/usb/host/ehci-mx6.c
> rename board/jornada/u-boot.lds => drivers/usb/host/ehci-tegra.c (53%)
> rename board/zipitz2/u-boot.lds => include/cmd_spl.h (56%)
> delete mode 100644 include/configs/omap1610h2.h
> delete mode 100644 include/configs/omap1610inn.h
> create mode 100644 lib/fdtdec_test.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
There are bugs and then there are bugs. And then there are bugs.
- Karl Lehenbauer
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
