Hi Asif, On 02/27/2012 07:19 PM, Asif Sulikeri wrote: > Hi Graeme, > > On Mon, Feb 27, 2012 at 12:12 PM, Graeme Russ <graeme.r...@gmail.com > <mailto:graeme.r...@gmail.com>> wrote: > > Hi Asif, > > On 02/27/2012 05:26 PM, Asif Sulikeri wrote: > > >> And the increase of 100kB is massive - are you sure you are > > compiling with > > >> the same set of options defined in the board config file? If > you are > > sure, > > >> then it would be interesting to find out what has caused it. > > > > > > I am compiling with the default options, with no additional changes > made to > > the conf file, the 1.3.4 version used to give me 150kB binary as > compared > > to the 252kB binary generated by the 2010.06 version. > > Ah - Looks like some more options have crept into the default > configuration > - Can you send the two board config files (as inline text, not > attachments) > so I can compare?
[snip] > and the contents of: *u-boot-2010.06/include/configs/davinci_dm365evm.h * > u-boot version: *2010.06* [snip] > > /* USB Configuration */ > #define CONFIG_USB_DAVINCI > #define CONFIG_MUSB_HCD I think this is where most of the code size increase is coming from - Try to #undef there and all of the following USB stuff will go > #ifdef CONFIG_USB_DAVINCI > #define CONFIG_CMD_USB /* include support for usb */ > #define CONFIG_CMD_STORAGE /* include support for usb */ > #define CONFIG_CMD_FAT /* include support for FAT/storage*/ > #define CONFIG_DOS_PARTITION /* include support for FAT/storage*/ > #endif > > #ifdef CONFIG_MUSB_HCD /* include support for usb host */ > #define CONFIG_CMD_USB /* include support for usb cmd */ > #define CONFIG_USB_STORAGE /* MSC class support */ > #define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ > #define CONFIG_CMD_FAT /* inclue support for FAT/storage */ > #define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */ > > #ifdef CONFIG_USB_KEYBOARD /* HID class support */ > #define CONFIG_SYS_USB_EVENT_POLL > > #define CONFIG_PREBOOT "usb start" > #endif /* CONFIG_USB_KEYBOARD */ > #endif /* CONFIG_MUSB_HCD */ > > #ifdef CONFIG_MUSB_UDC > #define CONFIG_USB_DEVICE 1 > #define CONFIG_USB_TTY 1 > #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 > #define CONFIG_USBD_VENDORID 0x0451 > #define CONFIG_USBD_PRODUCTID 0x5678 > #define CONFIG_USBD_MANUFACTURER "Texas Instruments" > #define CONFIG_USBD_PRODUCT_NAME "DM365VM" > #endif /* CONFIG_MUSB_UDC */ > Regards, Graeme _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
