Thanks Graeme, replies in-line,
On Fri, Feb 24, 2012 at 11:01 AM, Graeme Russ <graeme.r...@gmail.com> wrote: > Hi Asif, > > On Fri, Feb 24, 2012 at 4:25 PM, Asif Sulikeri <asifiqbal...@gmail.com> > wrote: > > Hi, any updates on this, this is a blocker for me, and waiting for your > > suggestions to resolve this issue. > > > > > On Mon, Feb 20, 2012 at 3:45 PM, Asif Sulikeri <asifiqbal...@gmail.com > >wrote: > > > >> Detlev Zundel <dzu <at> denx.de> writes: > >> > >> Appreciate your reply Detlev, please find my replies in-line, > >> > >> > what is the "DM365-IPNC-1.0.14" version about? I cannot see such a > >> > version (or tag) in mainline U-Boot. > >> > >> I'm sorry for the typo that is supposed to be 1.0.1. > > >Don't expect much response if you stay with version 1.0.1 > I'm sorry for all the confusion, the u-boot version is actually 1.3.4 and 1.0.1 is added as a suffix for internal use, sorry for that. Am I still not liable to get help for this version(1.3.4) of u-boot? > >> > On the other hand, davinci_dm365evm is a supported configuration in > >> > mainline, so why not try current code. This way we would be in a much > >> > better position to help you. > >> > > >> > >> I'll consider the suggestion, but since I've spent considerable time on > >> this, > >> want to make sure where actually the problem lies. > > Have you tried the suggestion of using the current mainline code? > > If the problem still exists in latest mainline, you stand a fair > chance that we'll make an effort to help you out :) > > :) Thats definitely not the way you bail me out ;), jokes apart, I did try using u-boot-2010.06 but the u-boot binary generated is bulky 252KB, as compared the usual 150KB, this leads to another blocker as the UBL(User Boot Loader) is now unable to load this bulky u-boot into RAM(or may be some other issue), and gets stuck as below: DM36x initialization passed! TI UBL Base Version: 1.50 Boot Loader BootMode = NAND Starting NAND Copy... Valid magicnum, 0xA1ACED66, found in block 0x00000008. Boot Mode Task Completed IPNC UBL Version: 1.1.0 Platform: DM365 Jumping to entry point at 0x81080000 and there's no response whatsoever after this. what might be the issue now? Regards, > > Graeme >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
