> From: Robert Delien <rob...@delien.nl> Why did you repost? Fix that "domain.unknown"
M > > This set of patches fixes ref_cpu clock setup. > > Robert Delien (4): > Renamed mx28_register to mx28_register_32 to prepare for > mx28_register_8 > Introducing 8-bit wide register, mx28_register_8 > Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 > registers > Preventing needless switching on and off PLL bypass mode, allowing > allow single-stepping through the SPL > > arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +++----- > arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +- > arch/arm/cpu/arm926ejs/mx28/mx28.c | 6 +- > arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 30 ++-- > arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 24 --- > arch/arm/include/asm/arch-mx28/regs-apbh.h | 254 > ++++++++++++------------ arch/arm/include/asm/arch-mx28/regs-bch.h | > 42 ++-- > arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++++------ > arch/arm/include/asm/arch-mx28/regs-common.h | 28 ++- > arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 ++-- > arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 ++-- > arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++++---- > arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 ++++++++-------- > arch/arm/include/asm/arch-mx28/regs-power.h | 28 ++-- > arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 ++-- > arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 ++-- > arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 ++-- > arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +- > arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +- > drivers/gpio/mxs_gpio.c | 16 +- > drivers/usb/host/ehci-mxs.c | 8 +- > 21 files changed, 507 insertions(+), 551 deletions(-) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
