On 19/02/2012 10:23, Albert ARIBAUD wrote: > Hi Robert, > > Le 15/02/2012 11:29, Robert@domain.unknown a écrit : >> From: Robert Delien<rob...@delien.nl> >> >> This set of patches fixes ref_cpu clock setup. >> >> Robert Delien (4): >> Renamed mx28_register to mx28_register_32 to prepare for >> mx28_register_8 >> Introducing 8-bit wide register, mx28_register_8 >> Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 >> registers >> Preventing needless switching on and off PLL bypass mode, allowing >> allow single-stepping through the SPL > P > I don't see this V5 on patchwork. Please a V6 with up-to-date Tested-By > / Acked-By etc -- and of course make sure the e-mail address stays correct. > > Besides, this touches i.MX, so I think Stefano should be at least Cc:
Right - Robert, I miss also which is the state of the current patches - is there still an issue that avoid boards to boot ? Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
