From: Robert Delien <rob...@delien.nl>
This set of patches fixes ref_cpu clock setup.
Robert Delien (4):
Renamed mx28_register to mx28_register_32 to prepare for
mx28_register_8
Introducing 8-bit wide register, mx28_register_8
Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1
registers
Preventing needless switching on and off PLL bypass mode, allowing
allow single-stepping through the SPL
arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +++-----
arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 6 +-
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 30 ++--
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 24 ---
arch/arm/include/asm/arch-mx28/regs-apbh.h | 254 ++++++++++++------------
arch/arm/include/asm/arch-mx28/regs-bch.h | 42 ++--
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++++------
arch/arm/include/asm/arch-mx28/regs-common.h | 28 ++-
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 ++--
arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++++----
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 ++++++++--------
arch/arm/include/asm/arch-mx28/regs-power.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 ++--
arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 ++--
arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +-
arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +-
drivers/gpio/mxs_gpio.c | 16 +-
drivers/usb/host/ehci-mxs.c | 8 +-
21 files changed, 507 insertions(+), 551 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
